Electronics & Robots Magazines | Scientific American

  • Thread starter Thread starter Ahmadsh
  • Start date Start date
  • Tags Tags
    Scientific
AI Thread Summary
Several magazines related to electronics and robotics were recommended, including Dr. Dobbs Journal, EDN, and Robot Magazine. These publications provide valuable insights and information for enthusiasts and professionals in the field. Each magazine offers a unique focus, catering to different aspects of electronics and robotics. The discussion highlights the importance of staying updated with industry trends through these resources. Exploring these magazines can enhance knowledge and understanding of the latest developments in technology.
Ahmadsh
Messages
38
Reaction score
0
Hi all,
I want ask about any magazine related to electronics and robots like scientific american magazine and make magazine
 
Engineering news on Phys.org
thank you so much berkeman
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top