Energy/Power content of Gasoline

  • Thread starter Thread starter GoldenAtlantis
  • Start date Start date
  • Tags Tags
    Gasoline
AI Thread Summary
A typical 15-gallon tank of gasoline contains approximately 539.55 kWh of energy, based on calculations that convert energy density from megajoules to kilowatt-hours. The energy content is derived from values of 31.6 MJ/L and 131 MJ/US gallon. The discussion highlights the importance of understanding discharge time when calculating power output. There is some confusion regarding a claim of 10,000 kW or 10 MW for a tank of gasoline, which appears to be an overestimation. Accurate calculations suggest that the energy content is significantly lower than the figures mentioned.
GoldenAtlantis
Messages
15
Reaction score
0
I am trying to find how many kW in a tank of gasoline. I was wondering if someone can confirm this for me. I read in a article on a EV site that he mentioned 10,000 kW, 10 MW (for a tank of gasoline). The guy was from a national lab so I am trying to work the math out. I do not know the discharge time. Thanks

My information/Calculations:
Background: typical four door car, 15 gallon tank
31.6 MJ/L
42.7 MJ/kg
131 MJ/US Gallon
35.97 kWh (per gallon)
539.55 kWh (per tank, 15 gallons)
 
Physics news on Phys.org
I get 33.35 per gal. I converted liters directly to gallons via the 3.8L/gal
 
Thanks

Thanks for the help
 
Thread 'Is 'Velocity of Transport' a Recognized Term in English Mechanics Literature?'
Here are two fragments from Banach's monograph in Mechanics I have never seen the term <<velocity of transport>> in English texts. Actually I have never seen this term being named somehow in English. This term has a name in Russian books. I looked through the original Banach's text in Polish and there is a Polish name for this term. It is a little bit surprising that the Polish name differs from the Russian one and also differs from this English translation. My question is: Is there...
Thread 'Beam on an inclined plane'
Hello! I have a question regarding a beam on an inclined plane. I was considering a beam resting on two supports attached to an inclined plane. I was almost sure that the lower support must be more loaded. My imagination about this problem is shown in the picture below. Here is how I wrote the condition of equilibrium forces: $$ \begin{cases} F_{g\parallel}=F_{t1}+F_{t2}, \\ F_{g\perp}=F_{r1}+F_{r2} \end{cases}. $$ On the other hand...
Back
Top