Solving Vector Problem B: Find Magnitude & Direction

  • Thread starter Thread starter cowgiljl
  • Start date Start date
  • Tags Tags
    Vector
AI Thread Summary
A ship traveling due east at 19 mi/hr encounters a northward current of 3 mi/hr, requiring the calculation of resultant velocity. The magnitude of the resultant velocity is approximately 19 mi/hr, but the direction must also be determined. To offset the current, the ship should head at an angle of about 8.97 degrees north of east. It's important to note that the problem asks for both magnitude and direction, emphasizing the vector nature of velocity. Properly representing the velocities as vectors simplifies the calculation of the resultant velocity.
cowgiljl
Messages
63
Reaction score
1
A ship sails due east across lake at 19 mi/hr. The ship encounters a current flowing due northat 3.00 mi/hr

A calculate the resultant velocity ( be sure to calculate the magnitude and direction)

I drew a picture

R^2 = 19^2 + 3^2
R = about 19 mi/hr



B) In what direction should the ship head in order to offswet the effect of the current
tan-1 (3/19) = 8.97 degrees n of east

Just need some reassurance I am doing these right
 
Physics news on Phys.org
First of all write vector eqn in terms of i,j,k components

then apply
V_a_b = V_a - V_b

rel velocity of a wrt b= vel of a - vel of b
 
Always try to write vector eqn if you are not able understand graphically and derive the results accordingly
 
Two points:

1) The problem said "calculate the resultant velocity " NOT "speed".
Technically, velocity is a vector quantity.
2) The problem specifically said " be sure to calculate the magnitude and direction"

You have only given the resultant speed (magnitude of the velocity).

You should either find the angle (arctan(3/19) north of east) or
(much simpler) write the two given velocities as vectors and add:
Using the standard convention that <1, 0> is east, <0, 1> north,
19 m/h n is <0, 19> and 3 m/h e is <3, 0>

The resultant velocity is <3, 19>. That was easy!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top