Extremely Quick Question (2 or 1 second)

  • Thread starter Thread starter Fusilli_Jerry89
  • Start date Start date
AI Thread Summary
Heating tempered glass with small air bubbles, approximately a third of a millimeter in radius, is unlikely to cause the bubbles to explode, as they were formed at higher temperatures without issues. The primary concern is the potential for glass breakage due to thermal stress if heated too quickly. Trust in the manufacturer’s quality can provide additional assurance regarding the glass's integrity. Proper safety precautions, such as wearing goggles, are recommended when handling heated glass. Overall, the glass should withstand the intended heating without significant risk of explosion from the bubbles.
Fusilli_Jerry89
Messages
158
Reaction score
0
Just a quick question about glass.. I bought a glass piece that is supposed to heat up to around 200 degrees celsius (it's tempered). I noticed that the glass has some bubbles in it. My question is..will the heat cause the the air in those bubbles to expand enough that they explode? Thx
 
Physics news on Phys.org
Well I guess it would depend ont he size of the air bubbles, the heat would probably cause it to expand, but wether it would cause the glass to crack I think it down to the size of the bubbles.
 
They have a radius of about a third of a millimeter..
 
The glass was formed at temperatures higher than 200C with the air bubbles already in there. So if they didn't explode when it was being cooled, they won't explode when it's heated up. What will cause it to break is stresses in the glass if you heat it up too fast, even if it is tempered. Take it easy.
 
If you can trust the company who produced the glass then you can fairly certainly trust the glass, if not...
Dick said:
Take it easy.

And wear goggles! :-p
 
thanks! :)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top