How Close Can You Safely Study a Black Hole?

AI Thread Summary
The discussion focuses on calculating the maximum mass of a black hole that a person can study safely from a distance of 50 times the black hole's event horizon radius (Rh). The gravitational acceleration experienced at the person's feet and head differs due to their height of 1.7 meters, which must not exceed a 10 m/s² difference. The relevant equations include the formula for Rh and the gravitational force at different distances from the black hole. The challenge lies in determining how to account for this difference in gravitational acceleration while solving for the black hole's mass. Ultimately, the problem requires balancing the gravitational effects to ensure safety while studying the black hole.
juliusqueezer
Messages
2
Reaction score
0

Homework Statement



The radius Rh of a black hole is the radius of a mathematical sphere, called the event horizon, that is centered on the black hole. Information from events inside the event horizon cannot reach the outside world. According to Einstein's general theory of relativity, Rh = 2GM/c^2, where M is the mass of the black hole and c is the speed of light. Suppose that a person who is 1.7 m tall wishes to study black holes near them, at a radial distance of 50Rh. However, the person doesn't want the difference in gravitational acceleration between their feet and head to exceed dag = 10 m/s^2 when they are feet down (or head down) toward the black hole.

(a) As a multiple of our sun's mass, what is the limit to the mass of the black hole the person can tolerate at the given radial distance?


Homework Equations


Rh=(2GM)/c^2
Fg=G((Mm)/r^2)

The Attempt at a Solution



I can solve for Rh and eventually get a mass, but that in no way accounts for the acceleration difference of the person. My question is, how must I account for this?
 
Physics news on Phys.org
Hello,

Well, the problem states that the person is 1.7m tall. So the person is going to experience some acceleration due to gravity at their feet:

Fg_{feet} = \frac{GMm}{r^2},

and some different acceleration due to gravity at their head, which is further away, if they are feet first:

Fg_{head} = \frac{GMm}{(r+1.7)^2}

The problem has said they wish to study at a distance of 50 R_h. You need to find the maximum mass of the black hole, that will not create more than a 10 m/s^2 difference in accelerations, above.

Hope this helps.
 
In the above formulae, the accn due to gravity is just GM/r^2. The 'm' is not necessary.
 
thanks for all the help. Eventually it came down to Afeet-Ahead=10. It ended in a massive equation with a lot of arithmetic.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top