Finding Center of Mass and Velocity of Three Moving Balls

AI Thread Summary
To find the center of mass and velocity of three moving balls, the positions and velocities of each mass must be accurately defined. Mass A is moving left at 8 m/s, Mass B right at 6 m/s, and Mass C right at 2 m/s, with specific distances between them. The center of mass (Xcm) was calculated as 7 m using the formula Xcm = (mAxA + mBxB + mCxC) / (mA + mB + mC). However, while the position was correct, the velocity calculation (Vcm) initially used incorrect values for the velocities, as direction must be considered (left as negative). The corrected velocity of the center of mass is essential for an accurate understanding of the system's dynamics.
Gisellebarr
Messages
3
Reaction score
0
Three Balls are moving along a straight line having the instantaneous positions shown in figure 8.15. At that instant, find the location and velocity of the center of mass of this system.

Figure 8.15

Mass A---------------------Mass B-----------------------------------Mass C

Mass A is moving at 8 m/s to the left with mass 2.00 kg

Mass B is moving at 6.00 m/s to the right with mass 3.00 kg

Mass C is moving at 2.00 m/s to the right with mass 4.00 kg

Mass A is 5.00 m from Mass B

Mass B is 7.00 m from Mass C

As simple as this problem is I don't even know where to start! The only thing I understand from the problem is conservation of momentum but I don't know how to apply it to this situation.
 
Physics news on Phys.org
This is not a conservation of momentum situation. What is the equation that gives the position of the center of mass of any number of masses? Look it up in your textbook.
 
Okay I rechecked the book and tried to work out a similar problem

I set the location of each mass on the x-axis with Mass A at 0, Mass B at 5 in the +x direction and Mass C at 12 in the + x direction

I applied that Xcm= mAxA+mBxB+mCxC/ mA+mB+mC= 7 m

To find the location of the center of Mass

Then

Vcm= mAvA+mBvB+mCvC/ mA+mB+mC= 4.67 m/s

To find the velocity of the center of mass.

Is this correct?
 
The position of the center of mass is correct, but the its velocity is not. Your equation is correct, but you plugged in the wrong numbers. Remember: If something moving to the right has positive velocity, something moving to the left has negative velocity.
 
Oh! That makes sense! Thanks :)
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top