Finding Characteristic Depth of Strip Foundation

Zouatine
Messages
19
Reaction score
0
Homework Statement
vibration of soil , get the sttifness of soil
Relevant Equations
Boussinesq solution k=4GR/1-v
hello everyone!
i have some problem in solution of this problem should i transfert the vertical stree to the horizontal stress and solve it ?

problem :

The equivalent static stiffness of the soil as an infinite elastic half-space under an infinite strip foundation is given in the vertical direction for a unit length of the foundation as:
static vertical stiffness K=1.6*G/1-v where
G: is the shear modulus of the soil ,
v : is the poisson ration of the soil

question:
Assuming an exponential increasing width ,
find the characteristic depth of the equivalent soil strip for the analysis of the horizontal vibration of the foundation.

thank you
 
Last edited by a moderator:
Physics news on Phys.org
Yes, you should transfer the vertical stress to the horizontal stress in order to solve the problem. You can use the following equation to calculate the characteristic depth of the equivalent soil strip for the analysis of the horizontal vibration of the foundation: Khorizontal = Kvertical * (1 + v) / (1 - v) where Kvertical is the vertical stiffness of the soil, and v is the Poisson's ratio. Once you have calculated the horizontal stiffness, you can then use it to calculate the characteristic depth of the equivalent soil strip.
 
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...

Similar threads

Replies
1
Views
4K
Replies
7
Views
2K
Replies
46
Views
8K
Replies
1
Views
2K
Replies
1
Views
6K
Back
Top