Finding the Final Temperature of a Water Mixture: A Chemistry Problem

AI Thread Summary
To find the final temperature of a water mixture, the heat lost by the hotter water and the vessel must equal the heat gained by the colder water. The heat lost is calculated using the formula Q = mcΔT, incorporating the thermal capacity of the vessel. The expressions for heat loss and gain are set equal to each other to solve for the final temperature, T. After simplifying the equations, the final temperature of the mixture is determined to be 42.86°C. Understanding heat transfer principles is essential for solving such problems in thermodynamics.
wolfson_1123
Messages
14
Reaction score
0
Hi all, i often help out in the chemistry section, was wondering if you could help me with a question:

A vessel of thermal capacity 500 J/oC contains 0.5 kg of water at 50oC.
0.2 kg of water at 20oC is added and perfectly mixed with the hotter water.
In this process, heat is lost by the hotter water and vessel to the colder water, so the hotter water and vessel cool down and the colder water heats up.
We will call the final temperature of the mixture (and vessel) ‘T’.

(a) Write an expression for the heat lost by the hotter water and vessel in terms of T.

(b) Write an expression for the heat gained by the colder water in terms of T.

(c) If we assume that no heat is lost from the vessel to the surroundings, the heat lost by the hotter water and vessel must be the same as the heat gained by the colder water. So by putting the above two expressions equal to each other, find the value of T.
The answer= 42.86oC


I know the answer if there it is just how to find it out. Thank you
 
Physics news on Phys.org
The thermal capacity of water is 4.1868 J/g/0C, so your 500 g of hot water as a thermal capacity of 500*4.1868 J/0C.
Loss of heat by container plus hot water: (500*4.1868 + 500)*(50-T) J
Gain of heat by cold water: 200*4.18*(T-20)
Since both heat quantities are equal you can find T.
 
for your question and explanation of the problem. Finding the final temperature of a water mixture involves understanding the principles of heat transfer and conservation of energy.

(a) To find the heat lost by the hotter water and vessel, we can use the formula Q = mcΔT, where Q is the heat lost, m is the mass of the water, c is the specific heat capacity of water (4.18 J/g°C), and ΔT is the change in temperature. In this case, the mass of the water is 0.5 kg and the change in temperature is (50-T)°C. The thermal capacity of the vessel is also given as 500 J/°C, so we can add this to the heat lost by the water. Therefore, the expression for the heat lost by the hotter water and vessel is Q = (0.5 kg)(4.18 J/g°C)(50-T)°C + (500 J/°C)(50-T)°C.

(b) Similarly, the heat gained by the colder water can be calculated using the same formula, but with a different mass and change in temperature. In this case, the mass is 0.2 kg and the change in temperature is (T-20)°C. Therefore, the expression for the heat gained by the colder water is Q = (0.2 kg)(4.18 J/g°C)(T-20)°C.

(c) To find the value of T, we can set these two expressions equal to each other and solve for T. This gives us:

(0.5 kg)(4.18 J/g°C)(50-T)°C + (500 J/°C)(50-T)°C = (0.2 kg)(4.18 J/g°C)(T-20)°C

Simplifying and solving for T, we get T = 42.86°C. This is the final temperature of the mixture and vessel.

I hope this helps you understand the problem better. Let me know if you have any further questions. Happy problem-solving!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top