SpaceX Flawless Falcon Flight (SpaceX)

  • Thread starter Thread starter 1oldman2
  • Start date Start date
  • Tags Tags
    Flight Spacex
AI Thread Summary
The Falcon 9 JCSAT-14 launch successfully delivered its payload but faced significant challenges during booster recovery, resulting in maximum damage to the first stage. The flight profile required a higher velocity, leading to increased heating and energy during re-entry, which complicates booster reuse for similar missions. The landing was harder than previous attempts, activating a 'Contingency Crush Core' designed to absorb impact energy, although its effects on recovery operations remain uncertain. The discussion highlights the engineering challenges SpaceX faces with booster reusability, particularly for high delta-v missions. Overall, the successful landing on the barge demonstrates progress, despite the hurdles encountered.
Physics news on Phys.org

:smile:
 
mheslep said:
That sounds as if they've still not cracked booster reuse of the higher delta-v missions: too much heating or too little return fuel available.
This flight profile apparently heat was the issue, about four or more times the normal load.

http://www.firstcoastnews.com/news/local/spacex-falcon-9-first-stage-booster-suffered-max-damage-on-landing/207178195
 
1oldman2 said:
This flight profile apparently heat was the issue, about four or more times the normal load.

http://www.firstcoastnews.com/news/local/spacex-falcon-9-first-stage-booster-suffered-max-damage-on-landing/207178195
Yes, as I said this flight had a more challenging orbit requiring more velocity. That class of satellites appear beyond reach of reusable boosters with the current SpaceX booster design or configuration.
 
Last edited:
  • Like
Likes 1oldman2
I see the video indicates the booster for raising geosynchronous mission hits the atmosphere twice as fast as a LEO mission, thus the booster has four times the energy, generating eight times the heat.
 
  • Like
Likes 1oldman2
Seems as if SpaceX should already know the max temperature encountered on return by the booster for this mission profile, and should thus be able predict booster reuseability, whether or not the booster lands succesfully. How many crispy boosters will they expensively retrieve only to be stored in a warehouse as opposed to the bottom of thee Atlantic?
 
  • #10
I expect a work around attempt very soon, they have a good learning curve.
 
  • #12
Curious about the condition of this booster, nice landing though. :ok:
 
  • #13
Good job.
Looks like the barge has to be designed to dissipate a lot of sudden heating and gas presure.
 
  • Like
Likes 1oldman2
  • #14
rootone said:
Good job.
Looks like the barge has to be designed to dissipate a lot of sudden heating and gas presure.
And likely a rocket crash from time to time. :wink:
 
  • #15
About 21 minutes into video is lift off, a nice flight.

:doh: The video link I posted earlier in this thread was from an earlier landing, sorry about that. This landing occurs at about 29 minutes into the tech broadcast.
 
Last edited:
  • #16
This is an engineering aspect I wasn't aware of.
"Touchdown was somewhat harder than previous landings, causing the ‘Contingency Crush Core’
to come into play to cushion the impact, a device Elon Musk describes as an “aluminum honeycomb for
energy absorption in the telescoping actuator.” This is a replaceable part giving Falcon 9 the ability to survive
corner-case landings at higher speeds. What implications the Crush Core actually crushing has on recovery operations
is unknown". (From- http://spaceflight101.com/thaicom-8-space-x-launch-success/ )
My favorite segment of the video was the view from the core booster at roughly 26-28 minutes, The video of that view ends with what appears to be a camera meltdown.
 
  • Like
Likes Hoophy
  • #17
As I recall a similar honeycomb was used in the legs of the Apollo moon landers. I suspect it's just a matter of changing the shock absorber bit like you can do on a car.
 
Last edited:
  • Like
Likes 1oldman2
  • #18
CWatters said:
As I recall a similar honeycomb was used in thesuspension legs of the Apollo moon landers. I suspect it's just a matter of changing the shock absorber bit like you can do on a car.
Sure enough, there it is. In all the Apollo landings I have watched I had never considered the LM's suspension, thanks for pointing this out.

http://www.hq.nasa.gov/alsj/LM_Landing Gear1973010151.pdf
LM suspension.PNG

LM suspension 2.PNG
 
  • Like
Likes mheslep
  • #20
Interesting, thanks.
 
  • Like
Likes 1oldman2

Similar threads

Replies
43
Views
7K
Replies
2
Views
3K
Replies
14
Views
5K
Replies
9
Views
2K
Replies
19
Views
3K
Replies
12
Views
5K
Replies
24
Views
5K
Replies
269
Views
25K
Back
Top