Future Engineer: Advice on Choices at UoAuckland

  • Thread starter Thread starter Gank
  • Start date Start date
  • Tags Tags
    Engineer Future
AI Thread Summary
The discussion revolves around choosing an engineering discipline at the University of Auckland, with interests spanning chemical, biomedical, mechatronic, and mechanical engineering. Participants suggest considering a career as a quantitative analyst if finance is a strong interest, noting that electrical engineers often excel in this area. For those inclined towards medicine, biomedical engineering is recommended. Mechatronics is highlighted for individuals interested in robotics and building systems with moving parts. Ultimately, traditional fields like civil, electrical, mechanical, and chemical engineering all offer viable career paths with good earning potential.
Gank
Messages
31
Reaction score
0
Hi there, I am currently in my last year of high school in New Zealand and looking to become and engineer or a surgeon. I am interested in all types of engineering and the college that I will be going to next year ( The University of Auckland ) offers many types of engineering. Should I pursue chemical, biomedical, mechatronic or mechanical? So what would your advice in what to do after I finish college? I also have an strong interest in commodities and stock markets.
 
Last edited:
Engineering news on Phys.org
Among the engineers I know, those who perform the best on quantitative finances are electrical engineers, but the sample size is small.

Search for "quantitative analyst" (in the case you didn't know this expression already). This may be the career your are looking for.
 
If you want to go into medicine you might prefer biomedical.

If you plan to build things with moving parts, and like robots and computers - try mechatronics.

Civil, Electrical, Mechanical, and Chemical are the four traditional fields ... I know people in all of these fields who make a good living and enjoy what they do.
 
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Back
Top