FYI : Tube Robot Looks Really Useful

  • Thread starter Thread starter hutchphd
  • Start date Start date
  • Tags Tags
    Robot Tube
AI Thread Summary
The discussion highlights the simplicity and utility of the Tube Robot, drawing parallels to natural mechanisms like jellyfish nematocysts that deploy barbs explosively. Participants express interest in building their own versions, suggesting starting with a bicycle inner tube and compressed air. The historical context of the tube's design is emphasized, noting its evolutionary basis over millions of years. High-speed imaging of the rapid deployment process is mentioned as a fascinating aspect. Overall, the conversation underscores the potential for innovation by mimicking natural solutions.
hutchphd
Science Advisor
Homework Helper
Messages
6,945
Reaction score
6,022
TL;DR Summary
I am totally surprised by the simplicity and potential utility of this soft robot.
Perhaps this is old news but that would be self-descriptive. How long has this been around? I want to build one today.


.
 
  • Like
  • Informative
Likes DaveE and anorlunda
Engineering news on Phys.org
hutchphd said:
Summary:: I am totally surprised by the simplicity and potential utility of this soft robot.

How long has this been around? I want to build one today.
The principle of inserting a thin folded tube without friction has been around for at least half a billion years.
The nematocysts of jellyfish or sea anemonies are examples. Barbs and toxin on the inside become external after the explosive deployment.
https://en.wikipedia.org/wiki/Cnidocyte#Structure_and_function

Start your experiments with a bicycle inner tube and compressed air.
 
  • Informative
  • Like
Likes hutchphd, DaveE and anorlunda
Baluncore said:
The principle of inserting a thin folded tube without friction has been around for at least half a billion years.
The nematocysts of jellyfish or sea anemonies are examples. Barbs and toxin on the inside become external after the explosive deployment.
https://en.wikipedia.org/wiki/Cnidocyte#Structure_and_function

Start your experiments with a bicycle inner tube and compressed air.
"When the trigger is activated, the tubule shaft of the cnidocyst is ejected and, in the case of the penetrant nematocyst, the forcefully ejected tubule penetrates the target organism. This discharge takes a few microseconds, and is able to reach accelerations of about 40,000 g.[1][2] Recent research suggests the process occurs in as little as 700 nanoseconds, thus reaching an acceleration of up to 5,410,000 g.[3]"

OK, kind of off-topic. But, 5,410,000g !
 
DaveE said:
...thus reaching an acceleration of up to 5,410,000 g.[3]
The deformation would be something to see in a high-speed imaging of that!
 
  • Like
Likes Tom.G and hutchphd
"everted"...great word
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...

Similar threads

Back
Top