Gravitation person weight problem

  • Thread starter Thread starter melodrameric
  • Start date Start date
  • Tags Tags
    Gravitation Weight
AI Thread Summary
The problem involves calculating the difference between a person's weight at the equator and the true gravitational force, considering Earth's rotation. Initially, the weight is given as 750 N, and the mass is derived using standard gravity. The centripetal acceleration due to Earth's rotation must be factored in, which reduces the effective weight. The correct approach involves calculating the centripetal force and adjusting the weight accordingly, leading to a final answer of 747.4 N, resulting in a difference of 2.58 N from the original weight. This highlights the importance of accounting for rotational effects in gravitational calculations.
melodrameric
Messages
7
Reaction score
0
here's the question (from mastering physics):
"The weight of a person at the equator, as determined by a spring balance, is 750 N. By how much does this differ from the true force of gravitational attraction at the same point? Assume that the Earth is spherically symmetric."

Now, i would assume what needs to be done is first finding the mass of the person (750 N / 9.8 m/s^2). then plugging that into the equation:
F = (G*m*M_e)/(R_e^2), using M_e = 5.92*10^24 kg and R_e = 6.38*10^6 m
Then, subtracting that from 750 N. I did this, and came out with 3 different answers depending on my value for acceleration (9.8 or 9.81) and how many figures i used from that figured mass. They were 1.62, 2.09, and 1.32. Mastering Physics told me those were all wrong.
...what?
 
Last edited:
Physics news on Phys.org
Looks like you didn't take the rotation of the Earth into account.
 
The question is making you realize the fact that part of our weight is gone to the centripetal acceleration. That statement may be a bit confusing, but if you think about it... if the Earth spun 100 times faster than it did, would you feel lighter? Now if the Earth didn't spin at all, how much heavier would you feel? The question is essentially asking you the latter question.

Hint: Find the centripetal force needed to keep you in circular motion around the equator of the Earth.
 
wow, how nice of mastering physics to add in the effect of rotation without the slightest bit of warning.
anyway, i checked my notes, and here's what i have written down:
V_person = (2*pi*R_e)/(T) = (2*pi*(6.38*10^6 m))/(24*3600 s) = 463.97 m/s
ΣF_r=m*a_r
n - m*g_0 = m*(-(V_p^2)/R_e)
n = m*g_0 - m*((V_p^2)/R_e)

so is it that last equation i should be using?
with that, i would come out with 747.4 N, with the difference being 2.58 N.
 
well i went ahead and entered that answer and got it right. thanks for your help :)
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top