HDMI cable wiring schematic (what colors go where)

AI Thread Summary
The discussion centers on the challenges of connecting a laptop with a VGA output to a TV with an HDMI input using a faulty HDMI to VGA cable. It is emphasized that a direct cable connection is not feasible due to the differing signal types, as HDMI carries digital signals while VGA is analog. Participants suggest that the user needs a proper converter circuit rather than attempting to solder the wires based on color, as this is unlikely to work. Recommendations for converter boxes are provided, highlighting the need for compatibility with the laptop's video card. Overall, the consensus is that a simple cable solution is insufficient for this type of connection.
jaybird81
Messages
2
Reaction score
0
Hi, I was hoping somone on this forum could help me out. I am not an engineer (although I wish I was). I am just DBA that is dealing with a wiring nightmare. My boss bought an HDMI to VGA cable from some guy on line for hooking up a laptop to a TV. The cable comes in and of course is no good, the HDMI connector basically fell apart when I plugged it in. So I am going to try and make it work, by sodering the cables to the conector. My problem is I don't know which color goes where on the actual HDMI connector. There are 8 wires (Black, Blue, Red, Brown, White, Pink, Dark Green and Light Green). Does anyone have a diagram or a schematic so I can try and fix it.
 
Engineering news on Phys.org
I'd be surprised if it works. It seems that HDMI has only digital data lines whereas vga has almost only analog ones. If there is no logic circuit in between you have probably been scammed. Cable colors can vary from manufacturer to manufacturer... and the pinning can be found online, but unless your graphics card does some very funny things it will not work.
 
jaybird81 said:
Hi, I was hoping somone on this forum could help me out. I am not an engineer (although I wish I was). I am just DBA that is dealing with a wiring nightmare. My boss bought an HDMI to VGA cable from some guy on line for hooking up a laptop to a TV. The cable comes in and of course is no good, the HDMI connector basically fell apart when I plugged it in. So I am going to try and make it work, by sodering the cables to the conector. My problem is I don't know which color goes where on the actual HDMI connector. There are 8 wires (Black, Blue, Red, Brown, White, Pink, Dark Green and Light Green). Does anyone have a diagram or a schematic so I can try and fix it.

First off, if it goes from VGA(out) to HDMI(in) then it would be a VGA to HDMI cable (converter) not the other way around that you stated.

Second there is no direct cable connection possible, it needs an actual converter circuit to achieve that.

So why don't you just tell us exactly what outputs are availaible on the laptop and what inputs are available on the TV and we can suggest the best option.
 
The laptop has VGA out and the tv has HDMI in.My boss said this cable was practically impossible to find. I appreciate all the help, like I said I am just a DBA, this stuff really isn't my thing.
 
Here is the HDMI pin-out: http://www.hi-fi-cables.com/hdmicomponentcables.php

http://www.lmgtfy.com/?q=VGA+to+HDMI" , $6.
The product description states, "Your Video card must support digital signal output through VGA port function. Please consult with your VGA card's user manual for more information."
 
Last edited by a moderator:
pantaz said:
The product description states, "Your Video card must support digital signal output through VGA port function. Please consult with your VGA card's user manual for more information."

Good catch pantaz. So this confirms what we suspected that a simple cable is not likely to work in most instances. (I've never even seen a video card that passes DVI through the VGA connector, though I guess some newer laptops might do it to save connector space).

More likely the OP will need something like a converter box such as :

http://www.zantech.com.au/converter/format/cp261h.html

or

http://www.jakeludington.com/ask_jake/20081219_vga_to_hdmi_adapter.html

BTW. I'm not recommending the linked products or the stores selling them - I've never used either. Just pointing out the type of thing OP probably really needs.
 
Last edited:
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...

Similar threads

Back
Top