Help Eric Solve 2 Heat Problems

  • Thread starter Thread starter ericarnold86
  • Start date Start date
  • Tags Tags
    Heat
AI Thread Summary
Eric seeks assistance with two physics problems involving heat transfer. The first problem involves a 0.018 kg ice cube at 0°C added to 0.454 kg of soup at 87°C, resulting in a final temperature of approximately 80.64°C after the ice melts. The second problem concerns a 25.4 g ring heated to 85°C and placed in a calorimeter with 0.05 kg of water at 24.8°C, where the specific heat capacity of the ring is calculated to be 99.65 J/kg after accounting for energy lost to the surroundings. Eric expresses gratitude for any help provided. The discussion highlights the application of heat transfer principles in solving these calorimetry problems.
ericarnold86
Messages
3
Reaction score
0
Thanks in advance for the help... I usually get Physics with ease, but for some reason these 2 threw me for a loop. If you have aol instant messanger, you could message me the answers at ericarnold86. Any help is greatly appreciated

#1:

A 0.018 kg cube of ice at 0.0 Celsius is added to 0.454 kg of soup at 87 Celsius. Assuming that the soup has the same specific heat capacity as water, find the temperature of the soup after the ice has melted. (There is a temperature change after the ice melts)


#2:

A 25.4 g ring that appears to be silver is heated to a temperature of 85 Celsius, and then is placed in a calorimeter containing .05 kg of water @ 24.8 Celsius. The calorimeter is not perfectly iinsulated, however, so that 0.11 kJ of energy is transferred by heat to the surroundings by the time a temperature of 25 celsius is reached. From the info provided, determine the specific heat capacity of the ring.

Thanks again
 
Physics news on Phys.org
#1:

A 0.018 kg cube of ice at 0.0 Celsius is added to 0.454 kg of soup at 87 Celsius. Assuming that the soup has the same specific heat capacity as water, find the temperature of the soup after the ice has melted. (There is a temperature change after the ice melts)
I don't know what values you have for heat of fusion of water or heat capacity of water. I'm using 334000J/kg for heat of fusion and 4187J/kg for heat capacity of water.

energy in system does not change:
ice melt + water heat up + water cool down = 0
mLf + mc\DeltaT + mc\DeltaT = 0
(0.018)(334000) + (0.018)(4187)(Tf - 0) + (0.454)(4187)(Tf - 87) = 0

My calculator has a thing that solves for 0 = so I won't be showing any work.
Tf = 80.64 celcius

#2:

A 25.4 g ring that appears to be silver is heated to a temperature of 85 Celsius, and then is placed in a calorimeter containing .05 kg of water @ 24.8 Celsius. The calorimeter is not perfectly iinsulated, however, so that 0.11 kJ of energy is transferred by heat to the surroundings by the time a temperature of 25 celsius is reached. From the info provided, determine the specific heat capacity of the ring.

system energy does not change:
ring + water + surroundings = 0
mc\DeltaT + mc\DeltaT + 110J = 0
(0.0254)c(25 - 85) + (0.05)(4187)(25 - 24.8) + 110 = 0
c = 99.65 J/kg
 
Last edited:
Those worked, thanks a lot
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top