Horizontal Distance of Cannon Fired at 30 Degrees: 85,000m

  • Thread starter Thread starter ucdawg12
  • Start date Start date
AI Thread Summary
A cannon is fired at a 30-degree angle with a muzzle velocity of 980 m/s, and the horizontal distance traveled before hitting the ground is calculated to be 85,000 meters. The initial vertical velocity is determined to be 490 m/s, leading to a time of 50 seconds to reach the peak. The mistake in the initial calculation was assuming the total time of flight was 50 seconds instead of 100 seconds for the full trajectory. The horizontal distance is then correctly calculated using the horizontal velocity of 850 m/s multiplied by the total time of 100 seconds. The final conclusion confirms that the projectile travels 85,000 meters before striking the ground.
ucdawg12
Messages
10
Reaction score
0
Here is the question: A large cannon is fired over level ground at an angle of 30 degrees above the horizontal. The muzzle velocity is 980m/s. What horizontal distance (in meters) will the projectile travel before striking the ground?

I know the answer, it is 85,000 meters, however I am having trouble arriving at that answer myself. Here is what I am doing. First I find how long it is in the air, I find the 980sin(30) to find the vertical velocity of 490. then I use the v=v(initial) + at, 0 = 490 +(-9.8t), t=50. Then to find the horizontal distance I do 980cos(30) = 850. Then v=x/t, vt=x, 850(50)=43000. But that isn't the right answer. Does anyone know what I did wrong? Thanks
 
Physics news on Phys.org
you are basically right, BUT, who told you the final velocity is zero? could it be zero in your case? if not, what is it?
 
oh god I just realized what I did, right, when the velocity was 0 the t was 50seconds but that only meant that it took 50 seconds to reach its peak, it would take another 50 seconds for it to come back down so it is 850(100)=x=85000m.

thanks :)
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top