How can I find the velocity of the combined cars after collision?

AI Thread Summary
To find the velocity of two combined cars after a collision, the first car, weighing 1500 kg, rolls down a 30-degree slope, reaching a speed of 17.15 m/s at the bottom. Assuming the second car has the same mass, conservation of momentum gives a combined velocity of 8.575 m/s immediately after the collision. The energy lost during the collision is calculated by comparing the initial kinetic energy of the first car with the final kinetic energy of both cars together. The energy lost is determined to be 110,295 J. The discussion emphasizes the importance of using conservation principles and assumptions about mass in collision problems.
lola2000
Messages
12
Reaction score
0

Homework Statement


A car of mass 1500kg is parked on a 30degree slope before rolling down a distance of 30m onto a flat section where it collides with a stationary car. The cars stick together and scrape along the road for 20m until they come to a rest. Calculate the velocity of the two combined cars immediately after the collision. Calculate the energy lost in the collision and the average coefficient of dynamic friction between the road and the two vehicles

Homework Equations

The Attempt at a Solution



Pythagoras gives that the first car will drop a vertical height of 15m.
So mgh=0.5mv^2 energy conservation for the first car when it reaches the bottom of the slope. So it's velocity at the bottom of the slope will be 17.15m/s

Then to find the velocity of the combined cars immediately after the collision I need to use conservation of momentum BUT I don't have the mass of the second car??
m1v1 +m2v2 = (m1+m2) v3
1500 * 17.15 + m2 *0 = (1500 +m2) * v3

How can I find the resultant velocity??
 
Physics news on Phys.org
I guess they expect you to assume that the mass of the 2nd car is the same as that of the first car.

Chet
 
You will need to think carefully (even, 'carfully') in the second part.
 
So if I assume that the second car is the same mass I would get a final velocity of the combined cars after the collision to be 8.575m/s

For the energy lost during the collision would I just need to compare the initial kinetic energy of car 1 before impact with the final kinetic energy of the combined cars after collision?

Ek lost = 0.5 (m1+m2) v^2 - 0.5 *1500 *17.15^2 = 110 295J
 
haruspex said:
You will need to think carefully (even, 'carfully') in the second part.
Excellent. You're right. You don't have to assume
lola2000 said:
So if I assume that the second car is the same mass I would get a final velocity of the combined cars after the collision to be 8.575m/s

For the energy lost during the collision would I just need to compare the initial kinetic energy of car 1 before impact with the final kinetic energy of the combined cars after collision?

Ek lost = 0.5 (m1+m2) v^2 - 0.5 *1500 *17.15^2 = 110 295J
yes
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top