How Do Air Bubbles Affect Viscosity in High Viscosity Fluids?

AI Thread Summary
Air bubbles in high viscosity fluids can affect the overall density but typically do not change the viscosity unless the air content is significant enough to alter the fluid's characteristics. The discussion emphasizes the need to clarify which type of viscosity is being referenced, particularly dynamic viscosity. It is noted that the macroscopic viscosity of a fluid with air bubbles will generally be lower than that of the pure liquid. The presence of air can make the fluid lighter, which is why mixers are often used in tanks. Ultimately, the relationship between air bubbles and viscosity is complex and depends on the specific conditions of the fluid mixture.
ZdMh
Messages
13
Reaction score
3
Is a high viscosity fluid(liquid), filled with air bubbles, more or less vicious than without air? Please provide the scientific principle behind that
 
Engineering news on Phys.org
Air bubbles should affect density, but viscosity of the fluid itself should remain the same, unless the amount of mixed air is big and sufficient to modify the characteristics of the mix.
Let’s wait for other posts.
 
Viscosity is an ill-defined term and before this discussion slides off the rails, it is important to specify which of the various "types" of viscosity is being discussed. In my experience they are largely defined by the experiments used to measure them.
https://en.wikipedia.org/wiki/Viscosity#Definition
 
hutchphd said:
Viscosity is an ill-defined term and before this discussion slides off the rails, it is important to specify which of the various "types" of viscosity is being discussed. In my experience they are largely defined by the experiments used to measure them.
https://en.wikipedia.org/wiki/Viscosity#Definition
Of course I meant the Dynamics viscosity not the kinematic
 
Lnewqban said:
Air bubbles should affect density, but viscosity of the fluid itself should remain the same, unless the amount of mixed air is big and sufficient to modify the characteristics of the mix.
Let’s wait for other posts.
Yes maybe; because my friend said to me "if the fluid has too much air bubbles it will be lighter therefore we use a mixer in tanks"... but I'm not sure yet of this info
 
ZdMh said:
Is a high viscosity fluid(liquid), filled with air bubbles, more or less vicious than without air? Please provide the scientific principle behind that
The macroscopic viscosity of this mixture will, of course, be less than the pure liquid alone. Just consider the limit of 100% gas.
 
  • Like
Likes Lnewqban and hutchphd
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
Back
Top