How Do You Calculate the Force a Tractor Exerts on a Trailer on an Incline?

  • Thread starter Thread starter owenhigdon
  • Start date Start date
  • Tags Tags
    Incline
AI Thread Summary
To calculate the force a tractor exerts on a trailer on a 16-degree incline, the weight of the trailer (3900 kg) must be considered along with the incline angle. The force required to maintain a steady speed of 3.0 m/s is equal to the component of the trailer's weight acting down the slope, calculated using the formula (W)(sin 16 degrees). Since the trailer is not accelerating, no additional force is needed beyond overcoming this gravitational component. Therefore, the calculation aligns with the correct answer provided in the textbook. Understanding the balance of forces is crucial in this scenario.
owenhigdon
Messages
4
Reaction score
0
The problem states that a 3900kg trailer is pulled by a tractor up a 16 degree incline with a steady speed of 3.0m\s.

I am asked what force the tractor exerts on the trailer.

I said that the force was equal to the (W)(sin)16degrees, i get the right answer in the back of the book but i think its a coincidence...any help on this one would be much appreciated
 
Physics news on Phys.org
me again! Your answer is right. Because you're not accelerating the trailer up the incline, there is no additional force required. All you need to do to maintain the speed of 3ms-1 is to overcome the backward force down the slope.
 

Thread 'Struggling to understand the concept of this question (ice cube in water optics question)'

TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
View full post »

Thread 'Rolling without slipping on a curved surface'

Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
View full post »

Similar threads

How do I find force given mass and constant velocity
Replies
3
Views
7K
How Much Force Must a Tractor Exert to Pull a Sled Up a Hill with Friction?
Replies
1
Views
1K
Force and Tension - Calculating Force on another object
Replies
6
Views
10K
Help with Gen Physics 1 Homework Problems
Replies
1
Views
5K
Calculating Force: Tractor on Trailers on Incline
Replies
5
Views
5K
Force exerted from car on trailer question
Replies
7
Views
17K
Tractor Towing a Trailer: What Force is Exerted on the Incline?
Replies
12
Views
7K
What Force Does a Tractor Exert to Tow a Trailer Up an Incline?
Replies
8
Views
5K
Find the tension in the cable and the force the ramp exerts on the tires
Replies
8
Views
5K
The Force of a Tractor Pulling a Trailer Up an Incline
Replies
5
Views
9K

Hot Threads

Recent Insights

Back
Top