How Do You Calculate the Moment of Inertia for a Square?

AI Thread Summary
To calculate the moment of inertia for a square with mass concentrated along its perimeter, the problem involves two parts. For part (a), the moment of inertia about an axis at the center of mass was attempted using the parallel-axis theorem and dividing the square into four rods, but the resulting calculation of 48 kg·m² was incorrect. In part (b), a similar approach was taken, leading to a calculation of 120 kg·m², which was also deemed incorrect. The discussion suggests that applying the perpendicular axis theorem directly from part (a) could simplify the solution for part (b). Overall, the calculations require careful application of the relevant theorems to achieve accurate results.
khangaroo
Messages
2
Reaction score
0

Homework Statement



Consider a 4 kg square which has its mass concentrated along its perimeter, with each side of length 6 m.

(a) What is the moment of inertia of the square about an axis perpendicular to the plane of the square at its center of mass? Use the parallel axis theorem and divide the square into parts. The moment of inertia of a rod rotated about its CM is \large_{I^{CM}_{rod}=\frac{1}{12}md^{2}}.
Answer in units of \large_{kg\cdot m^{2}}.

(b) What is the moment of inertia of the square about an axis perpendicular to the plane of the square at one of its corners?
Answer in units of \large_{kg\cdot m^{2}}.

Homework Equations



Moment of inertia of a rod rotated about its CM:
\large_{I^{CM}_{rod}=\frac{1}{12}md^{2}}

Parallel-axis theorem:
\large_{I=I_{CM}+Md^{2}}

The Attempt at a Solution



(a) I divided the square into 4 rods, and determined the moment of inertia in each of them.
\large_{I^{CM}_{rod}=\frac{1}{12}(\frac{m}{4})d^{2}=\frac{1}{48}md^{2}}
Then using the parallel-axis theorem:
\large_{I=I_{CM}+Md^{2}=\frac{1}{48}md^{2}+\frac{1}{4}m{(\frac{d}{2})} ^{2}=\frac{1}{12}md^{2}}
Whole system:
\large_{I=4{(\frac{1}{12})}md^{2}=\frac{1}{3}md^{2}}

I then plugged in the given values for m and d and got 48 \large_{kg\cdot m^{2}} but it wasn't correct.

(b) I divided the square into 4 rods again.
Skipping to the parallel-axis theorem:
For 2 of the rods:
\large_{I=I_{CM}+Md^{2}=\frac{1}{48}md^{2}+\frac{1}{4}m{(\frac{d}{2})} ^{2}=\frac{1}{12}md^{2}}
For the other 2 rods:
\large_{I=I_{CM}+Md^{2}=\frac{1}{48}md^{2}+\frac{1}{4}m{(\frac{d\sqrt{5}}{2})} ^{2}=\frac{1}{3}md^{2}}
Whole system:
\large_{I=2{(\frac{1}{12})}md^{2}+2{(\frac{1}{3})}md^{2}=\frac{5}{6}md^{2}}

Again, I then plugged in the given values for m and d and got 120 \large_{kg\cdot m^{2}} for this part but it wasn't correct.

I have no idea what I'm doing wrong.

Thanks in advance!
 
Physics news on Phys.org
They look ok.
For the second one you could have used the perpendicular axis theorem straight from the answer in a). Answer is ok though
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top