How Do You Integrate dy/dt with Respect to y in Ballistic Equations?

  • Thread starter Thread starter gendoikari87
  • Start date Start date
  • Tags Tags
    Ballistic
AI Thread Summary
The discussion focuses on integrating dy/dt with respect to y in the context of ballistic equations. It highlights that dy/dt can be expressed as 1/(dt/dy), allowing integration if t is a function of y. The participants also discuss the rearrangement of the equation d^2Y/dTdY and its implications for modeling physical processes versus purely mathematical problems. Additionally, the nonlinear nature of the equation dv/dt = -fV^2 - 9.8 is noted, raising questions about the constants involved and potential methods for solving it. Overall, the conversation emphasizes the complexities of integrating these equations in a ballistic context.
gendoikari87
Messages
11
Reaction score
0
[URL]http://latex.codecogs.com/gif.latex?(d^2Y)/(dTdY)=%20-c(dY/dT)-9.8(dT/dY)[/URL]

basically how do you integrate dy/dt with respect to y, I know dy/dt integrated with respect to t is simply Y, but the other I have no idea.

background: C is a constant that is a function of air pressure and is from the drag equation.
 
Last edited by a moderator:
Physics news on Phys.org
the equation you posted doesn't make sense to me. but to answer your second question
"how do you integrate dy/dt with respect to y"
you should know that dy/dt = 1/(dt/dy) so you can integrate with respect to y if you can write t=t(y).
 
actually I re wrote the thing in an easier form but it gets messy if you just use separation of variables

dv/dt=-fV^2-9.8

I can't remember how to do this using ODE, any help?
 
I'm having trouble understanding your first problem.
\frac{d^2Y}{dTdY}=-c \frac{dY}{dT} -9.8 \frac{dT}{dY}
The bit on the left-hand side could be rearranged:
\frac{d}{dT} ( \frac{dY}{dY} )
which is equal to zero, right? So then you'd have:
(\frac{dY}{dT})^2 = \frac{-9.8}{c}
Does this look right? Are you trying to model an actual physical process, or is it just a maths problem?

And your second equation:
\frac{dv}{dt}=-f V^2 -9.8
Is f a constant or a function? And is v the same thing as V? If so, then the equation is nonlinear in v, which doesn't have a general method to solve, although maybe its possible...
 
\frac{dv}{dt}=-c v^2 -9.8

\frac{dv}{v^2 + 9.8 / c}= -c \ dt

This is similar to the formula used for free fall, wiki article:

wiki_free_fall.htm
 
Last edited:
Hello everyone, Consider the problem in which a car is told to travel at 30 km/h for L kilometers and then at 60 km/h for another L kilometers. Next, you are asked to determine the average speed. My question is: although we know that the average speed in this case is the harmonic mean of the two speeds, is it also possible to state that the average speed over this 2L-kilometer stretch can be obtained as a weighted average of the two speeds? Best regards, DaTario
The rope is tied into the person (the load of 200 pounds) and the rope goes up from the person to a fixed pulley and back down to his hands. He hauls the rope to suspend himself in the air. What is the mechanical advantage of the system? The person will indeed only have to lift half of his body weight (roughly 100 pounds) because he now lessened the load by that same amount. This APPEARS to be a 2:1 because he can hold himself with half the force, but my question is: is that mechanical...
Thread 'Beam on an inclined plane'
Hello! I have a question regarding a beam on an inclined plane. I was considering a beam resting on two supports attached to an inclined plane. I was almost sure that the lower support must be more loaded. My imagination about this problem is shown in the picture below. Here is how I wrote the condition of equilibrium forces: $$ \begin{cases} F_{g\parallel}=F_{t1}+F_{t2}, \\ F_{g\perp}=F_{r1}+F_{r2} \end{cases}. $$ On the other hand...
Back
Top