How Does a Boy Affect the Angular Velocity of a Merry-Go-Round When He Jumps On?

  • Thread starter Thread starter masamune
  • Start date Start date
AI Thread Summary
When a boy of mass 50 kg jumps onto a stationary merry-go-round with a mass of 150 kg and a radius of 2 m, the angular velocity of the system can be calculated using the conservation of angular momentum. The initial linear momentum of the boy, given by mv, must equal the angular momentum of the combined system after the jump. The moment of inertia (I) of the system should include both the merry-go-round and the boy, calculated as I = (1/2)MR^2 for the disk plus MR^2 for the boy. The correct formula for angular velocity (ω) after the boy jumps on is derived from mvr = Iω, ensuring both components are accounted for. Properly combining the moment of inertia for both the boy and the merry-go-round is crucial for an accurate calculation of the final angular velocity.
masamune
Messages
15
Reaction score
0
A boy of mass m = 50 kg running with speed v = 4 m/s jumps onto the outer edge of a merry-go-round of mass M = 150 kg and radius R = 2 m, as shown in the picture above. The merry-go-round is initially at rest, and can rotate about a frictionless pivot at its center. You may assume that the inital velocity of the boy is tangent to the edge of the merry-go round.

Treat the boy as a point particle and the merry-go-round as a uniform solid disk. What is the angular velocity of the merry-go-round after the boy has jumped onto it?

I don't know if I can do this, but I set the linear momentum of the boy equal to the angular momentum of the merry-go-round with the boy.
Basically, mv = Iw
For my moment of inertia, I used the sum of both masses and plugged my given information into ((M+m)R^2)/2. This was how I calculated moment of inertia. Then I plugged the boy's mass and his initial speed divided by my moment of inertia and tried to get omega (w). I got 0.5 exactly, but it's not correct. Any help would be appreciated.
 

Attachments

  • merry.gif
    merry.gif
    1.2 KB · Views: 1,391
Physics news on Phys.org
linear momentum and angular momentum are not the same thing.

What you want to do is set the boys rotational inertia to the rotational intertia of the entire system.

you should get something like

mvr = Iw

I is the I of the system, I am sure you can figure that out..
 
Is my method of calculating the I of the system correct? I took the sum of the boy and the merry-go-round, multiplied by the square of the radius and all that divided by 2.This should give me the the I of the ystem right?
 
masamune said:
Is my method of calculating the I of the system correct? I took the sum of the boy and the merry-go-round, multiplied by the square of the radius and all that divided by 2.This should give me the the I of the ystem right?


you need to add the I of the boy and the I of the disk

I for a uniform disk rotating about the center of mass is \frac{1}{2}MR^2

I for a point mass is MR^2

add them together you get (\frac{1}{2}M_{merry-go-round} + M_{boy})R^2
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top