How Does an Electromagnetic Bell Work?

AI Thread Summary
An electromagnetic bell operates by completing a circuit when the bell push is pressed, allowing current to flow through the electromagnet. This current causes the electromagnet to attract the iron armature, which then pulls back the hammer. When the circuit is broken at point C, the current stops, releasing the hammer. Once the circuit is completed again, the springy metal resets the hammer to strike the gong. Understanding the sequence of these steps is crucial for explaining how the bell functions.
blackicerose
Messages
3
Reaction score
0
I am stuck on this homework question and would apprieciate a bit of help please.

Put the following sentences in the correct order to explain how the bell works.

*The springy metal pulls back the hammer

*A current flows through the electromagnet

*At the same time, the circuit is broken at point C

*Tom presses the bell push

*The electromagnet attracts the iron armature

*At C, the circuit is complete again

*The hammer strikes the gong

Thanks in advance!
 
Physics news on Phys.org
Last edited by a moderator:
Thanks

Sorry didn't read that. Thanks.

This is what I thought...

1. Tom presses the bell push.
2. At the same time, the circuit at point C is broken.
3. A current flows through the electromagnet.
4. The electromagnet attracts the iron armature.
5. At C, the circuit is complete again.
6. The springy metal pulls the hammer back.
7. The hammer strikes the gong.
 
Just imagine, if you break a part of the conducting wire in a circuit, then the current does not flow. But, if you complete the circuit by fixing the broken part, then current flows.

So you mixed up a few steps.
This site may help http://en.wikipedia.org/wiki/Electric_bell"
 
Last edited by a moderator:
does that mean i mixed up 5 & 6?
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »
Thread 'A cylinder connected to a hanging mass'

Thread 'A cylinder connected to a hanging mass'

Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
View full post »

Similar threads

Work and Energy of carnival dinner
Replies
2
Views
2K
How Does an Electric Bell Function?
Replies
4
Views
2K
How Fast Must the Hammer Move to Ring the Bell at the Carnival?
Replies
11
Views
5K
How Much Current Should Flow Through My Electromagnet Experiment?
Replies
5
Views
3K
Synchrotron Particle Accelerator: How Does It Work?
Replies
25
Views
4K
How Coulomb's Law relates to generators? (voltage)
Replies
1
Views
3K
How does an eddy current brake work exactly?
Replies
2
Views
2K
How does an oscillator truly work?
Replies
7
Views
2K
Correct graph of current vs voltage (photoelectric emission)
Replies
4
Views
2K
How Does Changing Current and Coil Loops Affect Electromagnet Lifting Force?
Replies
14
Views
5K

Hot Threads

Recent Insights

Back
Top