How Is a Dynamically Tuned Gyro (DTG) Constructed?

  • Thread starter Thread starter sahar.rezvani
  • Start date Start date
sahar.rezvani
Messages
2
Reaction score
0
Hy.I am mechanical engineer.I want information about process of make and Construction of DTG.
 
Engineering news on Phys.org
Dynamically Tuned Gyro(DTG)
 

Thread 'HP Required to move a robot 10meters at 1.5m/sec'

I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
View full post »
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'

Thread 'Calculate minimum RPM to self-balance a CMG on two legs'

Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
View full post »
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Similar threads

Gyroscopic effect in quadcopters
Replies
13
Views
3K
Is Studying Planar Multibody Dynamics Essential for Mechanical Engineers?
Replies
2
Views
2K
Using Arduino to Obtain Absolute Orientation from a 6-Axis Gyro
Replies
8
Views
3K
Automotive Construction of CVT Metal push belt
Replies
8
Views
4K
PID tuning of hydraulic drives with high inertia
Replies
9
Views
3K
How was tuning a piano done 50 or 60 years ago? (no apps back then)
Replies
5
Views
609
I Sagnac Interferometer (Fiber Gyro)
Replies
1
Views
2K
How to calculate the maximum stress in a rib of a complex construction
Replies
2
Views
1K
Which Pump Can Safely Circulate Fluid with Glass Spheres?
Replies
24
Views
3K
Calculate the radial force acting on bearings in a carousel
Replies
3
Views
3K

Hot Threads

Recent Insights

Back
Top