How Long for Rocket to Reach One-Tenth Light Speed?

AI Thread Summary
To calculate how long it takes a rocket accelerating at 32 ft/sec² to reach one-tenth the speed of light (1.86 x 10^4 miles/sec), the equation v_x = v_x0 + a_x t can be used, where v_x0 is zero. After determining the time, the distance traveled can be calculated using x = x0 + v_x0 t + 0.5 a_x t². It's crucial to ensure consistent units, converting feet to miles as necessary for the final results. The method outlined is correct and should yield the desired answers for both time and distance.
courtrigrad
Messages
1,236
Reaction score
2
A rocket ship in free space moves with constant acceleration 32 ft/sec^2. (a) If it starts from rest, how long will it take to acquire a speed one-tenth that of light? (b) How far will it travel in doing so?

So we are given a_{x} = 32 \frac{ft}{sec^{2}}, and v_{x}_{0} = 0. One-tenth the speed of light is 1.86\times 10^{4} \frac{miles}{sec}. For the first part would I use v_{x} = v_{x}_{0} + a_{x}t? And for the second part I could use x = x_{0} + v_{x}_{0}t + \frac{1}{2}a_{x}t^{2}

Thanks
 
Physics news on Phys.org
If the acceleration is measured in f/s^2, then your speed must be measured in feet/sec, not miles/sec. (Do the unit conversion.) Other than that, your method looks good.
 
for your question! To answer the first part, yes, you can use the equation v_{x} = v_{x}_{0} + a_{x}t . We know that v_{x} is equal to one-tenth the speed of light, so we can plug that in for v_{x} and solve for t. This will give us the time it takes for the rocket to reach one-tenth the speed of light.

For the second part, you can use the equation x = x_{0} + v_{x}_{0}t + \frac{1}{2}a_{x}t^{2} to find the distance traveled. Again, plug in the values you have and solve for x. This will give you the distance traveled by the rocket in reaching one-tenth the speed of light.

Remember, when using these equations, make sure to use consistent units. In this case, you may need to convert the units from feet to miles for your final answer. Hope this helps!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top