How Many Real Variables Are Needed to Construct a 2x2 Unitary Matrix?

gc2004
Messages
13
Reaction score
0

Homework Statement



how many real variables would be required to construct a most general 2by2 unitary matrix?

Homework Equations



a unitary matrix U is one for which the U(U hermitian) = identity matrix or (U hermitian)U = identity matrix

The Attempt at a Solution



first i wrote the unitary matrix as {{a1+ib1,a2+ib2},{a3+ib3,a4+ib4}}, where 'i' is square root of -1. using the condition U(U hermitian) = identity matrix, i get four independent equations. thus, i should expect the number of real variables required as 8 - 4 (number of constraints) = 4. but if i consider the definition (U hermitian)U = identity matrix, i get another set of four equations. Does that mean that the number of real variables required is 8-8 =0?

there is another way to attack the problem. a hermitian matrix must have real diagonal elements. the (1,2) element must be the complex conjugate of the (2,1) element and hence, i need 4 real variables to construct the most general 2by2 hermitian matrix. since a unitary matrix can be written as exp(iH) where H is a hermitian matrix, does this also indicate that i would need 4 variables for a unitary matrix as well?
 
Last edited:
Physics news on Phys.org


You are counting correctly, except (U*)U=I and U(U*)=I are not independent sets of equations. If one holds the other automatically holds. There are 4 real parameters describing a 2x2 unitary matrix.
 


thank you for your assistance... i later on figured out that it must be true since when i impose the condition that the determinant of the matrix is 1, then i end up getting SU2 group, to specify which i need three parameters... so, without the constraint of the determinant being 1, i must need 4 parameters
 
To solve this, I first used the units to work out that a= m* a/m, i.e. t=z/λ. This would allow you to determine the time duration within an interval section by section and then add this to the previous ones to obtain the age of the respective layer. However, this would require a constant thickness per year for each interval. However, since this is most likely not the case, my next consideration was that the age must be the integral of a 1/λ(z) function, which I cannot model.
Back
Top