How much of an iceberg is beneath the surface Archimedes principle

AI Thread Summary
To determine how much of an iceberg is submerged, Archimedes' principle states that the buoyant force equals the weight of the displaced fluid. Given the densities of ice (917 kg/m^3) and saltwater (1025 kg/m^3), the submerged volume can be expressed as a fraction of the total volume of the iceberg. By using the relationship between the densities, the submerged fraction (x) can be calculated as the ratio of the density of ice to the density of water. This means that x represents the portion of the iceberg's volume that is beneath the surface, and multiplying by 100 provides the submerged volume as a percentage. Understanding these relationships allows for the calculation of how much of an iceberg is hidden underwater.
mizzy
Messages
217
Reaction score
0
How much of an iceberg is beneath the surface...Archimedes principle

Homework Statement


Calculate how much of an iceberg is beneath the surface of the ocean, given that the density of ice is 917kg/m^3 and salt water has density 1025kg/m^3.


Homework Equations



archimedes principle: buoyancy = to the weight of the displaced fluid

The Attempt at a Solution


How can you do this when you're not given area and mass of the iceberg? Can someone guide me with this question?
 
Physics news on Phys.org


Those quantities you don't need will cancel out. It's often hard to see this right away, the best thing to do is to just start solving it manipulating the unknown quantities as variables and just hope for the best.

In this case, you should write out an equality for what you do know.
A hint... The volume of the water should be some fraction of the volume of the ice. (x*V) for example would be the volume of the water, where x is the fraction, and V is the volume of the ice.
 


Density ice/density water = volume water/volume ice

is that rite?
 


Yes that is exactly right.
The reason I said to look at the volume of water as x*V, because then you can see that (volume of water)/(volume of ice) is equal to the submerged fraction of the ice.
Volume of water = x*V
Volume of ice = V
(volume of water)/(volume of ice) = x
and x is the fraction of the ices volume that when multiplied gives you the waters volume. Therefore x is equal to the submerged portion of the ice.

So (Density of ice)/(Density of water)
is exactly the quantity you were looking for.. Also, if you multiply by 100 then you get the value as a percentage of the total volume that is submerged.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top