How to Calculate the Initial Velocity for Two Balls to Land Simultaneously?

AI Thread Summary
To determine the initial velocity needed for two balls to hit the ground simultaneously, one ball is thrown straight up from a 20m building while the second is thrown one second later. The first ball's time to fall is calculated as 2.02 seconds, while the second ball's time must account for the one-second delay. The initial mistake was considering the first ball's initial velocity as zero, which is incorrect since it was thrown upwards. Correcting this error by adding the one-second delay led to the accurate calculation of the second ball's initial velocity as 8.18 m/s. The discussion highlights the importance of properly interpreting the problem's conditions to arrive at the correct solution.
xarmenx
Messages
2
Reaction score
0
I am having a problem solving this:

A ball is thrown straight up from the edge of a 20m tall building (ignore air resistance). One second later a second ball is thrown. What must be the initial velocity of the second ball in order for both of them to hit the ground at the same time.
Knowns:
Ball 1
x=20m
v0=0m/s
a=g (I am using 9.8m/s^2)
t-down=2.02s (x=vt+0.5at^2, 20=0t+0.5(9.8)t^2)

Ball 2
x=20m
v0 is the unknown, t is also unkown
a=g

I don't know how to calculate t-up (ball was thrown up originally) thus I don't know the total time.
The answer in the book is 8.18m/s and t is 1.55s. Any help would be appreciated as to how to obtain those answers.

Using the displacement formula:
x=x0+v0+0.5at^2 I can calculate T-Down for ball #1 which is 2.02s (20=0+0+4.9t^2)

I thought maybe to calculate time down for ball #2 I can subtract 1 second from 2.02s(ball 1 t down) which is 1.02s.
Then substitute that into 20=v0(1.02)+4.9(1.02^2) = 14.6m which is not the correct answer. I assume the error is due to me missing t-up completely.

I also tried solving the equations simoltaneously since they are equal but it seems to make little sense when I do (and I also have 2 unknown on 1 side):

20=v0t+4.9at^2, v0t+4.9at^2-20=0
20=4.9at^2, 4.9at^2-20=0

V0t+4.9at^2-20=4.9at^2-20 (the -20 just cancels and the result is v0t equals 0.
 
Last edited:
Physics news on Phys.org
xarmenx said:
I am having a problem solving this:

A ball is thrown straight up from the edge of a 20m tall building (ignore air resistance). One second later a second ball is thrown. What must be the initial velocity of the second ball in order for both of them to hit the ground at the same time.
Knowns:
Ball 1
x=20m
v0=0m/s
a=g (I am using 9.8m/s^2)
t-down=2.02s (x=vt+0.5at^2, 20=0t+0.5(9.8)t^2)

Ball 2
x=20m
v0 is the unknown, t is also unkown
a=g

Welcome to PF,

The question states that "the ball is thrown straight up", however, later you state that the initial velocity of the ball is zero, this cannot be the case if the ball was thrown up, only if it was released from rest and allowed to fall.

~H
 
K guys sorry for the fuss and using up your time but the mistake I was making is like you said the initial ball is thrown up, the second one is dropped. So to get the right answer I had to add that one second not subtract it, which did provide correct results. Thanks again for the help.
 
xarmenx said:
K guys sorry for the fuss and using up your time but the mistake I was making is like you said the initial ball is thrown up, the second one is dropped. So to get the right answer I had to add that one second not subtract it, which did provide correct results. Thanks again for the help.

No problem.

~H
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top