How to Find the Laplace Transform of cos(t) * f(t)?

AI Thread Summary
To find the Laplace Transform of cos(t) * f(t), it is essential to recognize that the multiplication of cos(t) and f(t) can be approached by expressing cos(t) as exponential functions. This method allows for treating f(t) as a general function, where the impact of cos(t) is understood as time-shifting. The convolution theorem indicates that the Laplace transform of a product results in the convolution of the individual transforms, although this may not be directly applicable. Ultimately, using the given Laplace Transform F(s) and applying the time-shifting property simplifies the calculation. Understanding these concepts facilitates the transformation process without needing to perform integration by hand.
carlodelmundo
Messages
133
Reaction score
0
I am given a function f(t) with it's corresponding Laplace Transform in the Frequency Domain (F(s)).

I'm having a hard time wrapping my head around the product of say, L{cos(t)*f(t)}. The * is multiplication and not convolution. Must I do the integration for the Laplace transform by hand, or is there a short cut method using the table of Laplace transforms?

I want hints/direction, not a definitive answer.

Thanks
 
Engineering news on Phys.org
The convolution theorem works both ways; the Laplace transform of a product is the convolution of the Laplace transforms of the multiplicands. This may not be particularly useful to you though.

For cos(t)f(t) in particular, you might try expressing the cosine in terms of exponential functions.

It may be worth noting that cos(t)f(t) is the "double-sideband suppressed-carrier" form of amplitude modulation.
 
Thanks for the response. After mulling it over, I've figured it out:

One must treat f(t) in cos(t) * f(t) as simply any function (it doesn't matter what it is). After converting the cos(t) to exponentials (through) identities, one realizes that cos(t) affects f(t) through time-shifting. With the given F(s) function, one can easily calculate the time shift.

Thanks again
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...

Similar threads

Replies
31
Views
11K
Replies
1
Views
1K
Replies
7
Views
5K
Replies
4
Views
2K
Replies
17
Views
3K
Replies
1
Views
3K
Back
Top