How to give speech a Donald duck effect?

  • Thread starter Thread starter dexterdev
  • Start date Start date
AI Thread Summary
The "Donald Duck effect" can be achieved by manipulating the phase response of a voice signal, which involves altering the relationship between input and output signals in terms of phase shifts. Digital signal processing techniques such as phase shifting, filtering, and time-domain manipulation are essential for this purpose. A poor single-sideband (SSB) demodulator can also create this effect by distorting the voice signal. However, there is skepticism about the human ear's ability to detect phase changes, suggesting that frequency shifting might be more effective. Precise control of the phase response is crucial, and consulting with an expert in digital signal processing is advisable for successful implementation.
dexterdev
Messages
194
Reaction score
1
Hi PF,
I read that in the communication engineering book by simon haykin saying that if the phase response of the voice signal is altered we can get the donald duck effect. But how should I play with the phase response. Any advice.

-Devanand T
 
Engineering news on Phys.org
A poor SSB demodulator will give a good 'donald duck' effect. If you have a DSP program then you could arrange that quite easily. However, I'm not sure that a simple 'messing about' with phases would do what you want - more like frequency shifting would be needed. Inverting the frequency spectrum of the audio could do it, perhaps - easy to do, once you have DFT'd a short passage of speech.
 
I have the strongest doubt about our ears detecting any phase. I had made a software to synthesize a sound from its harmonics (...hence only periodic sounds... I had been fooled by Helmholtz' initial mistake) that could adjust each phase individually and that made zero difference for the ear, nada, niente, nitchevo, walu.

Though, I haven't still checked if we locate a noise source by the phase difference between our ears, so I could still accept this allegation.

De-tuned SSB let's the local oscillator beat, hacking the received signal quickly. This deforms the voice for sure. >30 years ago a hobbyist paper proposed a phase inverter driven by an oscillator to do this on voice and instruments. On electronic pianos then, the "chorus" effect was obtained this way; it sounded more or less like several instruments playing not exactly in tune.
 
Enthalpy said:
I have the strongest doubt about our ears detecting any phase. I had made a software to synthesize a sound from its harmonics (...hence only periodic sounds... I had been fooled by Helmholtz' initial mistake) that could adjust each phase individually and that made zero difference for the ear, nada, niente, nitchevo, walu.

Though, I haven't still checked if we locate a noise source by the phase difference between our ears, so I could still accept this allegation.

De-tuned SSB let's the local oscillator beat, hacking the received signal quickly. This deforms the voice for sure. >30 years ago a hobbyist paper proposed a phase inverter driven by an oscillator to do this on voice and instruments. On electronic pianos then, the "chorus" effect was obtained this way; it sounded more or less like several instruments playing not exactly in tune.

If it's tuned the 'wrong side' it will invert the audio frequency spectrum, too.
 
.

Hi Devanand T,

Thank you for bringing up this interesting topic. The "Donald Duck effect" is a well-known phenomenon in the field of communication engineering, where the human voice is altered to sound like the famous cartoon character. As you mentioned, this effect can be achieved by manipulating the phase response of the voice signal.

To understand how to manipulate the phase response, it is important to first understand what it is. The phase response refers to the relationship between the input signal and the output signal in terms of their phase shifts. In simpler terms, it is the delay or advancement of different frequencies in a signal.

To achieve the Donald Duck effect, the phase response of the voice signal needs to be altered in a specific way. This can be done by using digital signal processing techniques such as phase shifting, filtering, and time-domain manipulation. These techniques allow you to manipulate the phase response of the voice signal, which in turn alters the sound of the voice.

However, it is important to note that achieving the Donald Duck effect requires precise control and manipulation of the phase response. It is recommended to consult with a communication engineer or an expert in digital signal processing for specific techniques and advice on how to achieve this effect.

I hope this information helps. Best of luck in your experiments!

Sincerely,
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...

Similar threads

Back
Top