Revolutionizing Renewable Energy: The Wave-Engine Innovation

  • Thread starter Thread starter Pust
  • Start date Start date
AI Thread Summary
The discussion centers on an innovative wave energy generator concept that utilizes ocean waves to produce power. The inventor suggests that their design, featuring two floats kept half a wavelength apart, could enhance efficiency compared to existing wave power generators. They acknowledge the challenges of varying wave conditions and the importance of optimizing the design for different scenarios. The conversation includes considerations of energy limits imposed by gravity and the potential for using air-filled pontoons to increase energy output. Overall, the idea aims to revolutionize renewable energy through a novel approach to wave energy harvesting.
Pust
Hello guys
Some years ago, i "invented" this machine to make power out of waves in the ocean. So far no one else had come up, with total same ideer as i. What do you think, is it realistic to make it work?
1374047_10201669540167477_1137225_n.jpg
 
Engineering news on Phys.org
You should describe how it works. Does "updraft 1" bob up and down, turning the generator?

Have you tried to calculate how much power you could get? How does it compare to/differ from existing wave power generators?
 
And it seems like it would be more efficient to have the two floats on the surface, and kept 1/2 wavelength apart. Have you calculated the difference in efficiency between your scheme and other wave energy harvesting schemes? The ones that are actually built and operating in ocean trials are probably among the most efficient possible so far...
 
As I understand it the wavelength and height of waves varies a lot so one design objective is to make it work efficiently under all conditions
 
  • Like
Likes berkeman
I am not the big mathematician. But my thought is. if there is only one updraft. The one is limited in between, its own weight, and gravity to make energy. In this model, you can fill both with air, which cost much lesser to produce, and the model can produce limitless mass of energy multiplied with an half(in theory) but it will pull the generator equal both ways. some of the "limit" will be the wave high and wave top, but then again, you just make bigger pontoons which is not very expensive..
 
A correction; I write: "The one is limited in between, its own weight, and gravity to make energy" I mean between its own weight/gravity and upraft.
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
Back
Top