I could use some basic physics help

AI Thread Summary
The discussion focuses on two physics problems related to motion and collisions. For the first problem, the user is advised to apply Newton's second law (F = MA) to determine the car's acceleration and then use kinematic equations to find the stopping time and distance. The second problem involves using the conservation of momentum to find the speed of three coupled trains after a collision and calculating the change in kinetic energy, indicating it is an inelastic collision. The responses emphasize setting up the problems correctly rather than providing direct answers. Understanding these concepts is crucial for the user to grasp the physics involved.
Eric1234
Messages
2
Reaction score
0
ive been sick a lot lately, and have missed a lot of physics, my worst class, and I am doing all the homework I've missed and can't figure out these 2 problems.everything else has been done. any help, like how to do them, i don't need the answer just how to set it up and such. anything would be helpfully. I am an 11th grader, so its not college leveled.

"A 2500kg car is moving at a speed of 20m/s. the car is slowing don with a constant force of 500N
how long does it take to stop,how far does the car tavel as it comes to a stop,make a Force vs Time"

"A train with a mass of 20,000 Kg is moving at 3m/s and attaches 2 other trains with the same mass,already attached. the two other cars are moving with a sppeed of 1.2m/s and moving in the same direction as the first car.
what is the speed of the three joined cars, after the collision? change of kinetic energy during collision. what sort of collision has occured?"
 
Last edited:
Physics news on Phys.org
or no help:(
 
First question

Mass of train = 2500Kg
Velocity Initial = 20m/s
Force = Mass x Accel


500N = 2500Kg x Acceleration

Once you find acceleration (or deceleration in this case), you'd have

Velocity Initial = 20m/s
Veloctiy final = 0m/s
acceration = 500N/2500Kg

Then you can look for distance and time...





Second question


Thinking of conservation of momentum...

Momentum = mass x velocity

(20,000Kg)(3m/s) + (40,000Kg)(1.2m/s) = (60,000Kg)(x)


and change of kinetic energy of what during the collision?
 
Eric1234 said:
ive been sick a lot lately, and have missed a lot of physics, my worst class, and I am doing all the homework I've missed and can't figure out these 2 problems.everything else has been done. any help, like how to do them, i don't need the answer just how to set it up and such. anything would be helpfully. I am an 11th grader, so its not college leveled.

"A 2500kg car is moving at a speed of 20m/s. the car is slowing don with a constant force of 500N
how long does it take to stop,how far does the car tavel as it comes to a stop,make a Force vs Time"

"A train with a mass of 20,000 Kg is moving at 3m/s and attaches 2 other trains with the same mass,already attached. the two other cars are moving with a sppeed of 1.2m/s and moving in the same direction as the first car.
what is the speed of the three joined cars, after the collision? change of kinetic energy during collision. what sort of collision has occured?"

For the first question you'll want to use Newton's second law, F = MA to find the acceleration A. Then you can use

V = V_o + At

where V_o is the initial velocity, and V, your final velocity will be, of course, zero. Make sure that your acceleration is negative.

The how far the car goes can be found from

X = X_o + V_o t + \frac{1}{2} A t^2


You should start your second question with the conservation of momentum:

Momentum before the collision = Momentum after the collision

Before you have two objects traveling at different speeds and after the collision you have one object (the three coupled cars) traveling with one speed.

After you find the velocity of the coupled cars, you can find the kinetic energy before the collision and the kinetic energy after the collision. Since these kinetic energies will be different, this is an inelastic collision.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top