Experiments: Get Creative and Make Something Useful

  • Thread starter Thread starter The P-manator
  • Start date Start date
  • Tags Tags
    Experiments
AI Thread Summary
The discussion centers around the process of designing and conducting chemistry experiments, emphasizing the importance of creativity and personal engagement in experimentation. The individual expresses a desire for experiments that are not only cool and fun but also meaningful and useful. They describe their approach to experimentation, which involves researching compounds or reactions that pique their interest, assessing the availability of necessary elements, and exploring synthesis methods. The process often includes consulting industrial preparation methods and patents, as well as utilizing over-the-counter (OTC) chemicals to increase the challenge. The individual advocates for creating original experiments rather than replicating common demonstrations, suggesting that this approach enhances enjoyment and learning. They encourage others to share their unique experiments and express excitement about starting a new project involving sodium hydroxide (NaOH).
The P-manator
Messages
51
Reaction score
0
I'm going to get back to experimenting soon and I would like some experiments. Something cool, fun, but with a meaning, a goal. Useful products would be fun, too.
 
Chemistry news on Phys.org
This is how I come up with my experiments. I read somewhere in a chemistry book or online about a cool compound or neat reaction and say to myself, "I want to try that out". Most of the time, I don't have the slightest idea how I would synthesize this compound. I first ask myself, "Do I have access to all the elements that make up this compound (either in elemental form or in another chem)?" If, no, then I do some research on OTC sources. Then, I start researching into its production. I first see if the industrial preparation is plausible and if it is, chances are I probably don't have some of the necessary reactants. Then, I look into synthesizing those reactants, and so on. Patents are also good to look at. A good knowledge of chemistry makes the process a whole lot easier but usually I learn the required chemistry of the reactions involved as I go. This is the primary way that I get myself to learn new chemistry. I write the whole process out on paper and it is not uncommon for me to have a lot of steps. Then I experiment each step at a time and the goal, which is usually pretty far off at this point, becomes to reach the end compound. I also use OTC chemicals...it makes the whole process a lot more challenging!

You could also see an experiment that is cool and then just buy the necessary reactants from some chemical supplier, but they takes away all the fun in my opinion.

If you are craving new experiments so badly, chances are you have already tried all of the kiddie demonstrations that are common. Therefore, I wouldn't recommend replicating experiments that are in experiment books. Try designing your own instead of asking for other people's. I am not trying to be rude, but I think you'll find it all the more enjoyable!
 
Thanks, I think I'll do exactly that. Now, where to start?
 
Good luck and be sure to share any neat ones you come up!
 
You bet! Already working on getting NaOH.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top