I need some information about hydrodynamics

AI Thread Summary
Data on the relationship between turbulent flow speed and vibration frequencies on submerged bodies is sought. The discussion highlights the relevance of von Karman streets for cylindrical shapes and references "Boundary-Layer Theory" by Hermann Schlichting as a key resource. Additional recommendations include exploring literature on aeroelasticity and turbulent flows, such as works by Pope. Participants confirm the importance of these resources for understanding the dynamics involved. This information can guide further research into hydrodynamics and its effects on submerged objects.
Coldy
Messages
5
Reaction score
0
Hello,
I need data (articles and books) about what connection there is between the speed (or the power) of a turbulent flow and the range of vibration frequencies that it can create on the body submerged in the flow.
Thanks in advance.
 
Physics news on Phys.org
I don'n know how is the shape of the submerged body but you can start with a search on google about von karman streets (valid for cilinders). Also you can found some graphs in "theory of boundary layer", a classic book (the author is schligting, I do not remember exactly the spelling).
 
curioso77 said:
I don'n know how is the shape of the submerged body but you can start with a search on google about von karman streets (valid for cilinders). Also you can found some graphs in "theory of boundary layer", a classic book (the author is schligting, I do not remember exactly the spelling).

I think you mean "Boundary-Layer Theory", by Hermann Schlichting, 3. English edition, 1968
 
It sounds like you could use a good book on aeroelasticity and one on turbulent flows (e.g. Pope).
 
SteamKing: you are right. Thanks
 
Hello everyone, Consider the problem in which a car is told to travel at 30 km/h for L kilometers and then at 60 km/h for another L kilometers. Next, you are asked to determine the average speed. My question is: although we know that the average speed in this case is the harmonic mean of the two speeds, is it also possible to state that the average speed over this 2L-kilometer stretch can be obtained as a weighted average of the two speeds? Best regards, DaTario
The rope is tied into the person (the load of 200 pounds) and the rope goes up from the person to a fixed pulley and back down to his hands. He hauls the rope to suspend himself in the air. What is the mechanical advantage of the system? The person will indeed only have to lift half of his body weight (roughly 100 pounds) because he now lessened the load by that same amount. This APPEARS to be a 2:1 because he can hold himself with half the force, but my question is: is that mechanical...
Thread 'Beam on an inclined plane'
Hello! I have a question regarding a beam on an inclined plane. I was considering a beam resting on two supports attached to an inclined plane. I was almost sure that the lower support must be more loaded. My imagination about this problem is shown in the picture below. Here is how I wrote the condition of equilibrium forces: $$ \begin{cases} F_{g\parallel}=F_{t1}+F_{t2}, \\ F_{g\perp}=F_{r1}+F_{r2} \end{cases}. $$ On the other hand...
Back
Top