Interesting Documentary on the Dounreay Breeder Reactor

  • Thread starter Thread starter gmax137
  • Start date Start date
AI Thread Summary
The discussion centers around an interesting documentary about the Dounreay Breeder Reactor and a personal tour of the Torness nuclear reactor complex in Scotland. Participants highlight the complexities of reprocessing nuclear fuel, emphasizing the need for remote handling due to high radioactivity levels. A correction is made regarding the materials used in Advanced Gas-Cooled Reactor (AGR) fuel cladding, clarifying that stainless steel is utilized instead of zirconium alloys. The conversation also touches on the negligence involved in nuclear operations, as noted in a referenced video. Overall, the thread provides insights into nuclear reactor technology and safety considerations.
gmax137
Science Advisor
Education Advisor
Messages
3,124
Reaction score
3,582
I didn't know much about this plant, intersting documentary.



About halfway through, I realized the narrator is Balin from The Hobbit movies. (Ken Stott)
 
  • Like
Likes Greg Bernhardt, OmCheeto, Astronuc and 6 others
Engineering news on Phys.org
OK. Reading it once again I realized my mind must have skipped this word: "brobdingnagian".

: marked by tremendous size

EDIT: Heh.
 
Oh thanks. Whenever I hear that word, it repeats over & over in my mind, like a bubble-gum pop song from the '60's.
 
The video in the OP offers a fair assessment. There was a level of negligence involved.

Reprocessing nuclear fuel is complicated because it requires remote handling due to the high level of radioactivity of the Pu and recycled U. Then there is the waste (fission products).

sbrothy said:
Here's a short description of a personal tour of the nuclear reactor complex at Torness on the Scottish coast by one of my favorite authors.
One correction on the story, AGR fuel uses 20/25/Nb (20% Cr - 25% Ni - ~1% Nb stainless steel for the cladding, endplugs and grid. Zirconium alloys are not used.
https://www.sciencedirect.com/science/article/pii/S1876619616300778

https://info.westinghousenuclear.com/blog/the-art-of-innovation-westinghouse-agr-fuel
https://westinghousenuclear.com/uknuclear/products-services/advanced-gas-cooled-reactors/
 
  • Informative
Likes berkeman, sbrothy and Alex A
Hello everyone, I am currently working on a burnup calculation for a fuel assembly with repeated geometric structures using MCNP6. I have defined two materials (Material 1 and Material 2) which are actually the same material but located in different positions. However, after running the calculation with the BURN card, I am encountering an issue where all burnup information(power fraction(Initial input is 1,but output file is 0), burnup, mass, etc.) for Material 2 is zero, while Material 1...
Hi everyone, I'm a complete beginner with MCNP and trying to learn how to perform burnup calculations. Right now, I'm feeling a bit lost and not sure where to start. I found the OECD-NEA Burnup Credit Calculational Criticality Benchmark (Phase I-B) and was wondering if anyone has worked through this specific benchmark using MCNP6? If so, would you be willing to share your MCNP input file for it? Seeing an actual working example would be incredibly helpful for my learning. I'd be really...

Similar threads

Back
Top