Interpreting Vector Directions: A=8 at 45°, B=8 at 180/225°

  • Thread starter Thread starter Skotster
  • Start date Start date
  • Tags Tags
    Vector
AI Thread Summary
Vector A has a magnitude of 8 units at an angle of 45 degrees with the positive x-axis. Vector B, also with a magnitude of 8 units, points in the negative x direction, which corresponds to an angle of 180 degrees. The interpretation of the angles is clarified, confirming that Vector B does not point at 225 degrees, as that would be opposite to the direction of Vector A. The discussion emphasizes the importance of accurately interpreting vector directions as described in the problem. Understanding these angles is crucial for solving vector-related problems correctly.
Skotster
Messages
8
Reaction score
0
Am I interpreting this question correctly?

Vector A has a magnitude of 8 units and makes an angle of 45 degrees with the positive x axis. Vector B also has a magnitude of 8 units but points in the -x direction. ...

So, does that mean:

Vector A=8 at 45 degrees
Vector B=8 at 180 degrees

or

Vector A=8 at 45 degrees
Vector B=8 at 225 degrees

I know how to do the problem, it's just interpreting the book's wording on angles.

Thanks
 
Physics news on Phys.org
A at 45 degrees and B at 180 degrees. Saying vector B points in the -x direction is the same as saying vector B makes an angle of 180 degrees with the +ve x axis.
 
Thanks much
 
225 degrees would be opposite to A's direction not in "the -x direction. ... "
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top