I Is Capacitor Voltage Curved Like a Hyperbola?

  • I
  • Thread starter Thread starter vector222
  • Start date Start date
  • Tags Tags
    Curve Hyperbolic
AI Thread Summary
The discussion revolves around the behavior of a capacitor in a circuit with a linearly increasing voltage applied across a series resistor and capacitor. Participants analyze the voltage across the capacitor and its potential hyperbolic nature, with one user presenting mathematical equations to describe the current and charge dynamics in the circuit. They derive expressions for the voltage across the resistor and capacitor over time, noting that the voltage across the capacitor does not exhibit a hyperbolic shape. The conversation emphasizes the need for further verification of the mathematical results and clarifies that the voltage curve is not hyperbolic. Overall, the analysis highlights the complexities of capacitor behavior in response to varying voltage inputs.
vector222
Messages
8
Reaction score
0
TL;DR Summary
is this a hyperbolic curve?
Ok Hi everyone!

I was working on what would happen if you apply a linear increasing voltage to a series capacitor resistor.
The question is : If the capacitor voltage is plotted, is the cap voltage curve hyperbolic?

I've done some plots on the cap voltage and it sure looks hyperbolic but I can't prove it.

Any thoughts on this?
 
Physics news on Phys.org
If ##Q## is the charge on the capacitor the equation for the circuit reads
$$Q/C+R \dot{Q}=V(t).$$
Taking the time derivative gives
$$i/C+R \dot{i}=\dot{V}=A=\text{const}.$$
The solution of this obviously is
$$i(t)=C A+a \exp[-t/(RC)].$$
With ##i(0)=0## you get
$$i(t)=CA [1-\exp[-t/(RC)]].$$
Integrating, assuming ##Q(t)=0## gives
$$Q(t)=C U_C(t)=CA t + R C^2 A \{\exp[-t/(RC)]-1\}.$$
 
  • Like
Likes etotheipi
Hi Vanhees71 !

I had come up with
Vres(t) = R/rc (1 - exp (-t/rc) where

Vres(t) = voltage across the resistor at time t
R = input volts per second across the series resistor capacitor
r= ohms
c = farads

Vres(t) = R/rc approaches a max value as t goes infinite

voltage across the cap at time t =
Vcap(t) = R(t) - R/rc (1 - exp (-t/rc) )

Have not verified this but it does look close to your math.
Still don't know if the cap volts are hyperbolic.
 
This looks pretty similar. It's not a hyperbola.
 
Thread 'Question about pressure of a liquid'
I am looking at pressure in liquids and I am testing my idea. The vertical tube is 100m, the contraption is filled with water. The vertical tube is very thin(maybe 1mm^2 cross section). The area of the base is ~100m^2. Will he top half be launched in the air if suddenly it cracked?- assuming its light enough. I want to test my idea that if I had a thin long ruber tube that I lifted up, then the pressure at "red lines" will be high and that the $force = pressure * area$ would be massive...
I feel it should be solvable we just need to find a perfect pattern, and there will be a general pattern since the forces acting are based on a single function, so..... you can't actually say it is unsolvable right? Cause imaging 3 bodies actually existed somwhere in this universe then nature isn't gonna wait till we predict it! And yea I have checked in many places that tiny changes cause large changes so it becomes chaos........ but still I just can't accept that it is impossible to solve...
Back
Top