Isolated phase buswork fan motor

  • Thread starter Thread starter kman699
  • Start date Start date
  • Tags Tags
    Fan Motor Phase
AI Thread Summary
A user is seeking a replacement for a specialized fan motor powered by induction from bus work, originally manufactured by GE. The motor specifications include a minimum excitation of 500 amps and a maximum of 5000 amps. Suggestions include considering a standalone fan instead of a phase induction model and checking with surplus suppliers or contractors from substations and power plants. The complexity of the original design is noted, particularly regarding the fan's speed dependency on bus work loading. The search for a suitable replacement continues.
kman699
Messages
2
Reaction score
0
I am looking for a replacement for a fan motor the runs off of induction from attached bus work. It is very specialized and I have not been able to find a manufacture. It was made by GE but not for years

The original motor:
MOTOR, ELECTROMAGNETIC;CANADIAN GENERAL ELECTRIC,
MFG NO # 712-903074,MINIMUM EXCITATION 500 AMPS,
MAXIMUM EXCITATION 5000 AMPS

any help would be great. see pictures
 

Attachments

  • motor.jpg
    motor.jpg
    37.6 KB · Views: 488
  • motor1.jpg
    motor1.jpg
    33.5 KB · Views: 480
  • motor2.jpg
    motor2.jpg
    53.8 KB · Views: 487
Engineering news on Phys.org
Wow. That's some motor.

If it were me, I would be looking for a fan that in not a phase induction one. Maybe just a stand alone fan (single or polyphase).

But I'll keep searching with you for a replacement.

There may be a surplus motor somewhere. You might want to check with substation or power plant contractors.
 
the speed of the fan depends on the bus work loading. not sure why they made it over complicated.
 
Hey guys. I have a question related to electricity and alternating current. Say an alien fictional society developed electricity, and settled on a standard like 73V AC current at 46 Hz. How would appliances be designed, and what impact would the lower frequency and voltage have on transformers, wiring, TVs, computers, LEDs, motors, and heating, assuming the laws of physics and technology are the same as on Earth?
I used to be an HVAC technician. One time I had a service call in which there was no power to the thermostat. The thermostat did not have power because the fuse in the air handler was blown. The fuse in the air handler was blown because there was a low voltage short. The rubber coating on one of the thermostat wires was chewed off by a rodent. The exposed metal in the thermostat wire was touching the metal cabinet of the air handler. This was a low voltage short. This low voltage...
Thread 'Electromagnet magnetic field issue'
Hi Guys We are a bunch a mechanical engineers trying to build a simple electromagnet. Our design is based on a very similar magnet. However, our version is about 10 times less magnetic and we are wondering why. Our coil has exactly same length, same number of layers and turns. What is possibly wrong? PIN and bracket are made of iron and are in electrical contact, exactly like the reference design. Any help will be appreciated. Thanks. edit: even same wire diameter and coil was wounded by a...
Back
Top