Understanding Spin Stabilization in the M16 Rifle

  • Thread starter Thread starter endlessace
  • Start date Start date
  • Tags Tags
    Spin
AI Thread Summary
The M16 rifle utilizes a rifled barrel to impart spin on the projectile, enhancing stability and accuracy during flight. While rifling improves projectile stability, it can decrease muzzle velocity due to the grooves slowing the bullet and allowing gas to escape. Greenhill's Rule helps determine the necessary twist rate for stabilizing lead bullets based on their diameter and length. Smooth-bore guns, often used in military applications, achieve flight stability through aerodynamic projectiles with fins, eliminating the need for rifling. Understanding these principles is crucial for researching spin stabilization in firearms.
endlessace
Hi all,

I'm a student at a comunity college in Maryland. I'm always interest in weaponry. As to my knowledge, the M16 rifle's barrel has a twist which mean to increase the velocity of the projectile. The projectile would come out the barrel spinning. Just like how quarterback throws a football. I believe that it's because of the "spin stabilized." Tell me if I'm right. Is there a formula for spin stabilized? (Velocity = ?) I need all the information I can get to write a research essay. SO PLEASE HELP.

Thank you
Minh,
 
Physics news on Phys.org
Welcome to our little board! Yeah, that's the definition of a rifle -- the barrel is 'rifled,' or grooved, to spin the projectile. :)

The initial velocity has little to do with the rifling AFAIK. There is something called Greenhill's Rule, which gives you the level of twisting needed to stabilize a lead bullet -- it's like

(distance to go through one full revolution) = 150 * diameter^2 / length

where the diam&length are of the projectile.
 
Although rifling does increase range and accuracy, it actually decreases muzzle velocity. As the grooves on the inside of the barrel "grip" the projectile to spin it, they also slowe it down. Additionally, the grooves allow propellant expanding gases to escape around the projectile rather than pushing on it. However, these disadvantages are more than made up for in the greater stability of flight that rifling gives to the projectile. In addition to the gyroscopic effect, spinning the projectile also imparts a self-correcting feature to any minor aerodynamic flaws that may exist.

The great advantage of the military's new advance referred to as "smooth bore" guns is that they achieve this stability a flight without rifling.
 
How do these smooth bore guns work?
 
Originally posted by climbhi
How do these smooth bore guns work?
Better aerodynamics for the projectile, I think.
 
Tisk, tisk. Talking about guns. Guns kill people.

Anyway. The reason the bullut is more stable when it spins is the same reason why spinnging tops and gyroscopes stay upright.

It has to do with angular momentum so i assume your formula will have to use that.
 
Originally posted by russ_watters
Better aerodynamics for the projectile, I think.

Exactly. Smooth-bore guns are usually found on tanks, and they fire a projectile with fins (like a rocket). This projectile is encased in a shell that makes it form an air-tight seal with the inside of the gun barrell. Since these casings were originally made of wood, these projectiles were known as "Sabo" rounds, after the wooden shoes once worn in Holland. Once the projectile has cleared the end of the barrell, the wooden shell peels off, and the projectile continues onward, stabalised by its fins.
 
Back
Top