Kinematics 1-D Problem. Stuck on specific parts.

AI Thread Summary
Two cars accelerate from rest at a stoplight, with the blue car accelerating at 3.1 m/s² for 3.7 seconds before maintaining a constant speed for 12.5 seconds and then braking to a stop over 176 meters. The discussion focuses on calculating the blue car's acceleration during braking, its total moving time, and the yellow car's acceleration, with hints provided for solving these problems. The blue car's final velocity when braking is confirmed to be 0, and the participants emphasize using known variables to find the unknowns. The blue car's braking distance and time are critical for determining the yellow car's acceleration, as it catches the blue car just as it stops. The conversation highlights the importance of applying kinematic equations to solve the problem effectively.
Jabran Shakil
Messages
2
Reaction score
0
Two cars start from rest at a red stop light. When the light turns green, both cars accelerate forward. The blue car accelerates uniformly at a rate of 3.1 m/s2 for 3.7 seconds. It then continues at a constant speed for 12.5 seconds, before applying the brakes such that the car’s speed decreases uniformly coming to rest 176 meters from where it started. The yellow car accelerates uniformly for the entire distance, finally catching the blue car just as the blue car comes to a stop.1). How fast is the blue car going 1.1 seconds after it starts? 3.41

2). How fast is the blue car going 11.6 seconds after it starts? 11.47

3). How far does the blue car travel before its brakes are applied to slow down? 164.59

4). What is the acceleration of the blue car once the brakes are applied?

5). What is the total time the blue car is moving?

6). What is the acceleration of the yellow car?

I can't seem to figure out numbers 4-6. I've been stuck on them for a good hour now.
 
Physics news on Phys.org
Jabran Shakil said:
Two cars start from rest at a red stop light. When the light turns green, both cars accelerate forward. The blue car accelerates uniformly at a rate of 3.1 m/s2 for 3.7 seconds. It then continues at a constant speed for 12.5 seconds, before applying the brakes such that the car’s speed decreases uniformly coming to rest 176 meters from where it started. The yellow car accelerates uniformly for the entire distance, finally catching the blue car just as the blue car comes to a stop.1). How fast is the blue car going 1.1 seconds after it starts? 3.41

2). How fast is the blue car going 11.6 seconds after it starts? 11.47

3). How far does the blue car travel before its brakes are applied to slow down? 164.59

4). What is the acceleration of the blue car once the brakes are applied?

5). What is the total time the blue car is moving?

6). What is the acceleration of the yellow car?

I can't seem to figure out numbers 4-6. I've been stuck on them for a good hour now.

For #4, what do we know about the final velocity of the blue car?

For #5, which time interval are we missing in order to find the total time, and what do we need to know in order to find that time interval?

For #6, think about the formula ##\Delta{x} = v_{0x}\Delta{t} + \frac{1}{2}a_{x}\Delta{t^2} ##. What is/are the constant variable(s) that is/are shared between both the blue and yellow cars that we can use?
 
Last edited:
Re: 4

You know the speed the car was going when it started braking, the speed when it completed braking, and the distance it took to brake. Can you use those facts to determine the acceleration?

Re: 5

You are told the total time for segments 1 and 2, so we only need to figure out how long the braking segment takes. You know the distance, and once you've done no. 4 then you know the acceleration. Can you determine the time from that?

Re: 6

What is the total time the yellow car is moving? (Hint: how does this relate to the total time the blue car is moving?
 
thecommexokid said:
Re: 4

You know the speed the car was going when it started braking, the speed when it completed braking, and the distance it took to brake. Can you use those facts to determine the acceleration?

Re: 5

You are told the total time for segments 1 and 2, so we only need to figure out how long the braking segment takes. You know the distance, and once you've done no. 4 then you know the acceleration. Can you determine the time from that?

Re: 6

What is the total time the yellow car is moving? (Hint: how does this relate to the total time the blue car is moving?

PS: I agree with your stated answers for 1–3, except that they are missing units.
 
Okay so Number 4, the Final Velocity is 0 since it's stopped, right?
 
Jabran Shakil said:
applying the brakes such that the car’s speed decreases uniformly coming to rest

Jabran Shakil said:
Okay so Number 4, the Final Velocity is 0 since it's stopped, right?

I agree.
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top