Linear force on lead screw drive

AI Thread Summary
The discussion centers on calculating the linear force exerted by a metal plate attached to a lead screw driven by a stepper motor with 280 oz-in of torque. Participants emphasize the importance of using the correct search terms for finding relevant information, suggesting terms like "linear drive lead screw design equations." One user shares a specific resource from MIT that could aid in understanding the calculations involved. The conversation highlights the need for persistence and creativity in searching for technical solutions. Overall, the thread provides insights into both the mechanical aspects of lead screw drives and effective research strategies.
Nico33
Messages
3
Reaction score
0
I have a lead screw drive. The stepper motor puts out 280 oz-in of torque. Its attached to a 1/2 inch dia., .200" pitch, 2 start lead screw. There is a plate that's attached to the screw that moves back and forth along the screw. How much force can that metal plate exert in a linear motion?
 
Engineering news on Phys.org
This sounds like homework, have you done any work to try and solve this problem? Even something as simple as an internet search?
 
  • Like
Likes Nico33
It's not homework. It's for my job. It's a problem we're trying to solve. I've been doing online searches for quite some time now.
 
That is very helpful, thank you. Maybe I was wording it incorrectly when I was searching.
 
I understand, just be persistent and imaginative in rewording your searchs. Sometimes, when I search I have to restate my search description several times in order to find what I looking for; and, even that does not reveal information that I am sure is out there somewhere.
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Back
Top