Microwave Propulsion: Using RF to Push Magnetic Fields

AI Thread Summary
Microwave RF can vibrate bipolar molecules, suggesting a potential interaction with magnetic fields. Although a JPL engineer stated that radio energy does not affect magnetic fields, the discussion raises questions about the influence of RF on objects with magnetic properties. The electric (E) and magnetic (H) fields present in RF could theoretically interact with magnetic fields, similar to how microwaves affect molecular vibrations. The weak nature of these fields does not negate their existence or potential effects. This exploration into RF's capabilities may warrant further investigation into its applications in propulsion.
Squeeze
Messages
20
Reaction score
0
I once asked a JPL engineer if radio energy could affect a magnetic field, his answer was just plain no. But I have a problem with microwave RF affecting bipolar molecules. I mean microwaves cause these molecules to vibrate and they do so because the RF affects the electric and magnetic fields of the atoms. So why can't RF be used to push something that has a magnetic field, similar to the vibration effect of microwaves?
 
Engineering news on Phys.org
RF fields have an E and a H field
the E field is electric, the H field is magnetic.
They are both weak, but they do exist, and they interact with things (like your radio's antenna)
 

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »
Thread 'What's the most likely cause for this carbon seal crack?'

Thread 'What's the most likely cause for this carbon seal crack?'

We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
View full post »

Similar threads

I Magnetic Resonance physics question: RF pulse role and 'in-phase'
Replies
9
Views
3K
A Nuclear moments in molecular spectroscopy
Replies
19
Views
2K
The every day use of the magnetic part in EM radiation
Replies
6
Views
1K
I Can Specific Oscillating Electric Fields Heat Dipolar Molecules Selectively?
Replies
4
Views
1K
RF cavities and related devices
2
Replies
73
Views
8K
RF tube with photocathode, photoinjector
Replies
7
Views
2K
How to explain the Quantum Mechanics/Math of the stages of MRI imaging
Replies
4
Views
3K
Can Electromagnetic Fields Generate Net Thrust with a Metal Plate?
Replies
5
Views
3K
I Some questions about Cosmic Microwave Background radiation
Replies
13
Views
6K
B How does mechanical motion start at the deepest, smallest level?
Replies
36
Views
4K

Hot Threads

Recent Insights

Back
Top