Mystery Stain Solved with Fertilizer Chemistry!

  • Thread starter Thread starter SGKent
  • Start date Start date
  • Tags Tags
    Chemistry Mystery
AI Thread Summary
The discussion centers around the effects of a fertilizer mix containing Ammonium Sulfate, Potassium Sulfate, Superphosphate, Manganese Sulfate, and Boric Acid on laundry. After handling the fertilizer, a white t-shirt became stained dark brown after washing with Tide and bleach, while other whites turned beige. The stains were suspected to be caused by manganese, as there was no iron in the fertilizer. Attempts to remove the stains were unsuccessful until lemon juice and hydrogen peroxide were applied, which resulted in the stains disappearing instantly. The likely chemical reaction involved the bleach oxidizing manganese to manganese dioxide, and the hydrogen peroxide converting it back to a soluble form, possibly manganese ions.
SGKent
Messages
2
Reaction score
0
I mixed some fertilizer based on a soil test. The chemistry contained Ammonium Sulfate prills (NH4)2SO4, Potassium Sulfate prills K2SO4, Superphosphate CaH4P2O8, trace of Manganese Sulfate MNS04, and trace of Boric Acid H3BO3.

I mixed it and wiped my hands on the front of a white tee shirt. It remained white. When washed today with tide and bleach NaClO, the front of the shirt turned dark brown and the rest of the sizeable laundry load, all whites, towels etc., turned a deep beige. We were unable to remove the stain which was more like a dye. finally guessing that the stain was some form of manganese I added some lemon juice to about the 4th or 5th try to get rid of the stain. Then added some Hydrogen Peroxide H2O2. The stain instantly dissappeared as soon as the H2O2 hit it.

A rewash with tide and a little bleach it did not come back. Any ideas what might have been the reaction that turned the whole load beige, reddish brown. There was no iron listed as an ingredient of any of the minerals used.
 
Last edited by a moderator:
Chemistry news on Phys.org
THANK YOU
 

Thread 'Humidity of a saturated NaCl solution with anticaking additive'

I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
View full post »

Hot Threads

Recent Insights

Back
Top