Optics, lens problem pleaase help

  • Thread starter Thread starter foolISH
  • Start date Start date
  • Tags Tags
    Lens Optics
AI Thread Summary
The discussion focuses on a problem involving two converging lenses with specified focal lengths and an object placed in front of the first lens. The user calculates the image distance for the first lens but ends up with a result that does not match any provided options. A key point highlighted is that the image formed by the first lens serves as the object for the second lens, necessitating the correct calculation of the object distance for the second lens. The final image size can be determined after finding the correct distances and magnification. Accurate calculations are essential to arrive at one of the given answer choices.
foolISH
Messages
5
Reaction score
0
Optics, lens problem pleaase help :)

1. Two converging lenses, the first with focal length 40 cm and the second with focal length 33 1/3 cm, are separated by 10.0 cm. An object of height 6.0 cm is placed 20.0 cm in front of the first lens. What are the size and orientation of the final image?

A. 6.0 cm, upright
B. 6.0 cm, inverted
C. 24.0 cm, upright
D. 24.0 cm, inverted
E. 1.5 cm, inverted




this is my work :
f1 = 40 cm
ho = 6 cm
do = 20 cm

1/f = 1/di + 1/do
1/40 = 1/di + 1/20
di = -40

f2 = 33.3 cm
do = 10 cm

1/f = 1/di + 1/do
1/33.3 = 1/di + 1/10
di = -14.29

m = -di / do
m = 14.29 / 10
m = 1.429

m = hi / ho
1.429 = hi / 6 cm
hi = 8.574



clearly, that's not one of the given options :(

can someone pleease tell me wat I am doing wrong ?
thnxx
 
Physics news on Phys.org
nobody ?
prettyyy pleaaaseee :(
 
The image due to the first lens acts as the "object" for the second lens. So once you know where the first image is, you must determine its distance from the second lens. This distance will become your "do" for the second lens and allow you to solve for "di". Once you have these numbers, you can find the size of the final image.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top