I Parameters of the rough surface (for electromagnetic scattering)

AI Thread Summary
The discussion focuses on labeling statistical parameters, specifically sigma (σ) and correlation length (lc), on a schematic representation of a rough surface for a manuscript on electromagnetic scattering. It suggests that σ can be represented as a vertical error bar, while lc can be depicted as a horizontal bar. Participants are looking for clarity on how to effectively illustrate these parameters in their figures. Additionally, links to relevant papers are shared for further reference on the topic. Proper labeling of these parameters is essential for enhancing the understanding of surface roughness in electromagnetic scattering studies.
Ahmed123
Messages
6
Reaction score
1
Dear friends,
I will be grateful if anyone can help me
I study electromagnetic scattering by rough surfaces for a certain case. Each rough surface can be specified with the statistical parameters sigma (σ) and correlation length (lc). while writing my manuscript I drew a schematic representation of a rough surface. one of the reviewers asked me to label these parameters (σ and lc) on the figure. I can't understand how to label these parameters on the figure as they are just statistical parameters that control the surface roughness level. so, can anyone explain to me how to label the statistical parameters of the rough surface?
 
Physics news on Phys.org
Thread 'Gauss' law seems to imply instantaneous electric field propagation'

Thread 'Gauss' law seems to imply instantaneous electric field propagation'

Imagine a charged sphere at the origin connected through an open switch to a vertical grounded wire. We wish to find an expression for the horizontal component of the electric field at a distance ##\mathbf{r}## from the sphere as it discharges. By using the Lorenz gauge condition: $$\nabla \cdot \mathbf{A} + \frac{1}{c^2}\frac{\partial \phi}{\partial t}=0\tag{1}$$ we find the following retarded solutions to the Maxwell equations If we assume that...
View full post »
Thread 'A scenario of non-uniform circular motion'

Thread 'A scenario of non-uniform circular motion'

(All the needed diagrams are posted below) My friend came up with the following scenario. Imagine a fixed point and a perfectly rigid rod of a certain length extending radially outwards from this fixed point(it is attached to the fixed point). To the free end of the fixed rod, an object is present and it is capable of changing it's speed(by thruster say or any convenient method. And ignore any resistance). It starts with a certain speed but say it's speed continuously increases as it goes...
View full post »

Thread 'Do electron density waves accompany EM waves in coaxial cables?'

Maxwell’s equations imply the following wave equation for the electric field $$\nabla^2\mathbf{E}-\frac{1}{c^2}\frac{\partial^2\mathbf{E}}{\partial t^2} = \frac{1}{\varepsilon_0}\nabla\rho+\mu_0\frac{\partial\mathbf J}{\partial t}.\tag{1}$$ I wonder if eqn.##(1)## can be split into the following transverse part $$\nabla^2\mathbf{E}_T-\frac{1}{c^2}\frac{\partial^2\mathbf{E}_T}{\partial t^2} = \mu_0\frac{\partial\mathbf{J}_T}{\partial t}\tag{2}$$ and longitudinal part...
View full post »

Similar threads

I Minimizing by trisecting a function dependent on 3 parameters
Replies
3
Views
1K
A Retarded time and advanced time (and binning)
Replies
3
Views
1K
Surface roughness in 2D sinusoidal corrugation
Replies
1
Views
4K
How to design surface roughness model using CST?
Replies
1
Views
5K
I Is There a Curve For a Material's Surface Area vs. UTS
Replies
2
Views
1K
Effect of temperature on surface tension
Replies
2
Views
1K
I A novel explanation of CKM and PMNS matrix parameters
Replies
2
Views
2K
I Understanding Confidence Intervals for Fit Parameters
Replies
3
Views
2K
I Confusion about Scattering in Quantum Electrodynamics
3
Replies
134
Views
10K
I Entropy of the last scattering surface and today's universe?
Replies
5
Views
2K

Hot Threads

Recent Insights

Back
Top