Physics spring/crate hits another spring problem

  • Thread starter Thread starter MattNguyen
  • Start date Start date
  • Tags Tags
    Physics Spring
AI Thread Summary
A crate of mass 0.29 kg compresses a spring with a constant of 581 N/m by 0.1 m before colliding with a second spring with a constant of 246 N/m. The first part of the problem involves calculating the compression of the second spring when the crate hits it, which was found to be 0.1537 m. For the second part, the crate's velocity upon striking the second spring is determined using energy conservation principles, but there is confusion regarding the potential energy of the first spring. The discussion highlights that the first spring's potential energy is relevant, but it is unclear if the crate is still attached to it during the collision. The conversation emphasizes the need to clarify the relationship between the springs and the crate's motion.
MattNguyen
Messages
6
Reaction score
0

Homework Statement


A crate of mass m = 0.29 kg is set against a spring with a spring constant of k1 = 581 N/m which has been compressed by a distance of 0.1 m. Some distance in front of it, along a frictionless surface, is another spring with a spring constant of k2 = 246 N/m.

(a) How far, d2 in meters, will the second spring compress when the crate runs into it?

(b) How fast, v in meters per second, will the crate be moving when it strikes the second spring?

(c) Now assume that the surface is rough (that is, not frictionless). You perform the experiment and observe that the second spring only compresses a distance d2/2. How much energy, in joules, was lost to friction?

Homework Equations


W=change in mech energy=Kf+Uf-Ki-Ui

The Attempt at a Solution


[/B]
I already calculated part a to be 0.1537. I just don't know how/if it relates to part b.

So far I have .5mv^2+.5kx=2.905 for part b. I'm just unsure what x is supposed to be or if I even set it up correctly.
 
Physics news on Phys.org
MattNguyen said:
I'm just unsure what x is supposed to be
So am I. It's your equation.
First, I assume you meant x2. Secondly, at the point in time indicated for part b, neither spring is under compression.
 
Yeah, that's what I meant. The first spring is stretched, though, so I'm assuming it has potential energy.
 
MattNguyen said:
Yeah, that's what I meant. The first spring is stretched, though, so I'm assuming it has potential energy.
It does not say it is attached to the first spring, merely pushed against it.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top