Position Loop Equation (Kinematics)

AI Thread Summary
The discussion focuses on deriving the position loop equations for a solar panel deployment mechanism attached to a satellite. The user has defined the lengths of components but is struggling to formulate the y loop equation in a rectangular coordinate system. They are considering whether to switch to local, global, or natural coordinate systems for a solution. Attached files include a system drawing and a reference document for similar mechanisms. The user expresses frustration over the lack of responses to their inquiry.
kashoo
Messages
41
Reaction score
0
What will be the position loop equation of the attached file. The system is of Solar Panel Deployment attached to Satellite Body .
The lengths are
AB = Yoke = a
BC=CD=DE = Solar Panles = b

I have been trying to fine position loop equations (i.e x & y ) in rectangular coordinate system but y loop equation is not achievable.
Should I try something in Loacal /Global/ Natural coordinate system.

Two files are attached ...one is of my system's drawing
Other one is a reference document of analysis of this kind of mechanism which is at

http://iris.sid.inpe.br:1916/col/sid.inpe.br/marciana/2004/12.23.11.00/doc/Brasilian ijar.pdf
 

Attachments

Last edited by a moderator:
Engineering news on Phys.org
No Reply :frown: :frown:
 
:( :( :( :(
 
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
Back
Top