Where Is the Mistake in the Relativity Problem with Moving Rods?

  • Thread starter Thread starter alvaros
  • Start date Start date
  • Tags Tags
    Mistake
alvaros
Messages
166
Reaction score
0
Referring to the attached drawing:
Two rods 3m long. Rod A is moving at 0,866 c from right to left.
The pictures are taken from the point of view of rod B.

( 1 )In 1 a ray of ligth reaches the end of both rods. It happens that the reading of the clocks at rod A and rod B is 0.
Because v = 0.866 *c -> l´= l * 0.5 , that's why the left end of rod A is at the middle point of rod B.

( 2 )In 2 after 10 ns ( at clocks on rod B ) the light reaches the left end of rod B, assuming c = 30 cm/ns.
Rod A has moved 0.866 * c * 30 ns/cm = 260 cm.

But, because t'= t *0.5, the reading on clocks at rod A is 5 ns. So the light has moved, in the frame of reference of A, 150 cm -> the light must be at the middle of rod A, and it isn't according to the explained in ( 2 ). Where is the mistake ?
 

Attachments

Last edited:
Physics news on Phys.org
alvaros said:
Where is the mistake ?
You have the wrong formula for t'. The correct formula is:

t' = γ(t-vx/c²)

Your formula neglects the relativity of simultaneity.
 
Thank you for the answer. I made a google search and I found your formula, but I don't know how to apply it ( what does x mean ? )

Could you resolve the problem with numbers ?
Is the drawing 1 correct ? ( the left end of rod A is at the middle of rod B ? )
Where is the right end of rod A when the ligth reaches the left end or rod B ?
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
Back
Top