Ray diagrams (lenses) problem. I need full explanations.

AI Thread Summary
The discussion centers on creating accurate ray diagrams for a thin converging lens with a specific object height and distance. The original attempt at drawing the rays was incorrect, as the rays did not follow the principles of lens optics and would not converge to form an image. Key rays that should be included are the principal ray, which travels horizontally and passes through the focus after refraction, and the straight-through ray that goes through the center of the lens without deviation. The correct rays converge at the head of the image, which is inverted, while the foot of the image is defined by the ray along the lens axis. Understanding these principles is crucial for accurately depicting the behavior of light through lenses.
dantenewton
Messages
7
Reaction score
0
Ray diagrams (lenses) urgent problem. I need full explanations.

1. The question

An object of height 2cm is placed 15 cm from a thin converging lens of focal length 10cm.
Complete the paths of two rays on the figure to show their passage through the lens to the image formed.

2. The attempt

http://www.flickr.com/photos/56105561@N05/5427538657/

If I have drawn wrongly, please kindly pinpoint the mistakes and suggest your answers. Thank you so much and have a nice day!
 
Physics news on Phys.org


The rays given in the figure are not the principle ray nor the central ray, and neither passes through the focus on the object side. It doesn't look like these rays will converge at an image.

Look at a https://sites.google.com/a/ggwo.org/ggca_science_lab/Home/physics/physics-light-and-optics/physics-lenses" .
 
Last edited by a moderator:


Thank you gneill, but I want to clarify my doubts:

the thing is that one light ray travels downwards and the other upwards from the top extremity of the object to meet the convex lens. The website you suggested doesn't give a ray diagram that has a light ray traveling upwards from the object. Can you help me?
 


danteNewton said:
Thank you gneill, but I want to clarify my doubts:

the thing is that one light ray travels downwards and the other upwards from the top extremity of the object to meet the convex lens. The website you suggested doesn't give a ray diagram that has a light ray traveling upwards from the object.

That's right! They don't show your rays because, for a thin converging lens, they won't converge on the image; they are divergent rays that do not contribute to the formation of the image.

The rays that will define the extent of the image are:

1. The ray along the lens axis (which is not refracted as its angle of incidence with all surfaces of the lens is 90°);

2. The principle ray which travels horizontally from the head of the object to the lens and is refracted so that when it emerges it passes through the focus on the opposite side of the lens; and

3. The 'straight through' ray that goes from the top of the object straight through the center of the lens and out the other side -- the lens refractions cancel for this ray, so it doesn't deviate from a straight line.

Rays 2 and 3 converge at the head of the image (the image is inverted). Ray 1 defined the foot of the image.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top