Recycling of reaction-mass by linear wormholes

AI Thread Summary
The discussion explores a theoretical method for recycling reaction mass in spacecraft using linear wormholes to achieve high speeds with minimal fuel. The proposed design includes a NERVA-type reactor and a plasma propulsion system, utilizing the Casimir effect to create wormholes for mass transfer. Key concerns include the potential loss of momentum when reaction mass enters the wormholes and the challenge of moving the wormholes with the spacecraft. The author invites feedback to refine the concept and address its flaws. Overall, the idea aims to overcome the limitations of traditional three-dimensional physics in space travel.
Lord Flasheart
Messages
94
Reaction score
0
In my mind, I tried to overcome the horrendous problem of having to carry every gram of reaction mass with your space-craft. Surely, how could a person using three dimensions recycle mass without having the recycled fuel slow down the craft? In three-dimensions, Newton's Third Law could be a curse to conservative space-farers. But what if a person didn't limit himself to the tri-dimensional physics, but exceeded them?

My theory is that, by using a linear arrangement of wormholes and engine, one could achieve high speeds with little fuel.

A little diagram to show what I mean:

/-----------------\
|••• |===| ••••|
\-----------------/

The object in the middle is the engine, probably a NERVA type reactor that simply pushes the reaction mass (•••) out the back by using heat. Or, if one wanted to be a little more futuristic, the engine could be a plasma that is propelled by electro-magnetic fields.

the two arc shaped figures are the wormholes, the right being the entry point, and, the left being the exit. By utilizing the casimir effect on a large scale, one could create wormholes big enough to let a little matter go through. (The plasma propulsion method would be more suited for the wormholes, as the plasma stream could be modified to be thinner/thicker depending on the casimir effect's effeciency.

But there are many flaws to my design.

What if momentum is lost when the reaction mass enters the wormholes? The slower fuel from the exit wormhole would upset the balance of perpetual fuel replenishment, thus slowing it down.

How could one move the wormholes with the ship? Perhaps an electro-magnetic field applied to the wormholes, (after giving them a charge) could do the trick.

Is there another method to expand/create wormholes? The casimir effect seems adequete enough, but other situations might arise for the need of grand ships that would require a more effective way of throuting the wormholes.

Thus, I finish my virtual manuscript. Comments are required so as to perfect the theoritical design of it. If you would be so kind as to participate in perfection, state your opinions
 
Engineering news on Phys.org
Refreshing the un-freshed.

Surely there is someone out there willing to speak of his own mind about this! I cannot believe this thread is "echoing" in the silence. I invite thee-all.
 
T'is a good idea,
I would suspect that if there is *something* wrong, *someone* would fix it.
If it isn't broke, do not attempt repair,
de Nice codre
 
How did you find PF?: Via Google search Hi, I have a vessel I 3D printed to investigate single bubble rise. The vessel has a 4 mm gap separated by acrylic panels. This is essentially my viewing chamber where I can record the bubble motion. The vessel is open to atmosphere. The bubble generation mechanism is composed of a syringe pump and glass capillary tube (Internal Diameter of 0.45 mm). I connect a 1/4” air line hose from the syringe to the capillary The bubble is formed at the tip...
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'
Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
I'd like to create a thread with links to 3-D Printer resources, including printers and software package suggestions. My motivations are selfish, as I have a 3-D printed project that I'm working on, and I'd like to buy a simple printer and use low cost software to make the first prototype. There are some previous threads about 3-D printing like this: https://www.physicsforums.com/threads/are-3d-printers-easy-to-use-yet.917489/ but none that address the overall topic (unless I've missed...
Back
Top