What is the length of each side of a resonant dipole to receive 12MHz?

AI Thread Summary
To construct a resonant dipole for receiving 12MHz, the wavelength (λ) is calculated as 25 meters, leading to a dipole length of 12.5 meters. Each side of the dipole is then 6.25 meters, as a half-wave dipole consists of two quarter-wave elements. The confusion arises from misunderstanding that the total dipole length is divided by two to find the length of each side. A resonant half-wave dipole requires this division because it operates on the principle that each side corresponds to a quarter of the wavelength. Understanding these principles clarifies the correct dimensions for constructing the antenna.
amgc63
Messages
5
Reaction score
0
TL;DR Summary
I don’t understand why require to divide twice
Hi, a question:

Construct a resonant dipole to receive 12MHz.

Answer;

λ = c/f
= (3x10^8) / (12 x10^6)
= 25m
The dipole length λ/2 = 12.5m
The length of each side dipole is 12.5m/2 = 6.25m

Im confused, isn’t it the answer is 12.5m?
Why require to divide 12.5m/2 again to get the answer 6.25m?

Hope someone can explain.

Thanks in advance
 
Engineering news on Phys.org
A half-wave dipole antenna is made up of two quarter-wave elements. A quarter-wave monopole antenna has one quarter-wave element over a ground plane...

1650297254798.png

https://www.antenna-theory.com/antennas/halfwave.php
 
  • Like
Likes davenn and Klystron
A resonant half-wave dipole has a length of λ/2 because the transit return time of the wave, there and back, must be equal to the period of the wave. Half of a resonant half-wave dipole will be λ/4.
 
  • Informative
Likes Klystron and berkeman
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Beauty of old electrical and measuring things, etc.'
Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...

Similar threads

Back
Top